Table of Contents
Advertisement
M S-7252 M ainboard
2 The Create Array W izard opens. Follow the W izard to create a Mirror array.
3 At the Create Array W izard Welcome screen, click Next.
4 At the RAID Array Selection page, make sure that RAID Mode is set to "Mirroring"
and Stripe Size is set to its default value of 64K, then click Next.
5 At the Free Disk Selection page, select the two drives that you want to Mirror and
click Next.
6 Click Next again and the following screen shot will appear:
7 Check "Intialize Array" and then click Next. The Initialization Warning dialog appears.
8 Click OK. The Clearing System Data screen appears again with the Initialize Array
check box checked as shown below.
B-20
Advertisement
Table of Contents
