Download Print this page

Bomma Blimp BOM1105724 Installation Manual page 9

Wall light fixtures

Advertisement

Cleaning
• All cleaning and maintenance must be
carried out when the power is off, ideally
entirely disconnected.
• When cleaning, use fine-fabric gloves.
Particularly avoid handling metal-
coated crystal without gloves, to avoid
fingerprints and loss of gloss.
• Use soft cloths to clean metal parts. Such
parts may be cleaned with a dry cloth or
a cloth dampened in warm water with
a mild detergent. Avoid using solvents or
technical benzene to clean metal parts.
Avoid alcohol-based cleaners that may
cause changes of surface colors.
• Clean fine-steel surfaces with products
sold especially for this purpose.
• To clean the glass parts, use products in
concentrations recommended by their
producers. Immediately after cleaning,
dry the light fixture and hang it again.
• When cleaning glass parts, a
concentrate of 90% water and 10%
vinegar may also be used. Apply this
mixture with a clean spray-bottle. Put
on cotton gloves, apply the solution to
one of them and gently wipe the parts
requiring cleaning. Immediately dry the
cleaned surfaces with the other glove.
Give particular care to cleaning individual
parts of the light that cannot be
dismantled. Inappropriate handling may
cause loosening or chipping these parts.
• Avoid cleaning removable parts of the
light fixture in a dishwasher.
Important Notice
• The producer bears no responsibility
for damage cause by unprofessional
installation or inappropriate handling
of the light fixture, including installation
with accessories other than those
recommended by the producer.
• The producer bears no responsibility
for damage caused by unprofessional
interventions into the mounting and
safety features of the light fixture,
including damage to the product by
inappropriate power supply, storage
or use of the light fixture in a humid
environment.
• Do not place the light fixture in humid
environments, such as near a boiler or
other sources of water vapor. Do not
place the lighting fixtures in showers or
above bathtubs and never touch them
when you are in contact with water.
• The producer reserves the right to make
minor changes to the construction of the
light fixture without prior notice.

Advertisement

loading