Download Print this page

Bomma Orbital BOM890420 Installation Manual

Floor light fixtures

Advertisement

Quick Links

orbital
Design by Studio deFORM
bomma

Advertisement

loading

Summary of Contents for Bomma Orbital BOM890420

  • Page 1 Design by Studio deFORM bomma...
  • Page 3 • The dimensions and weight of glass parts may differ slightly due to manual production. • All Bomma products are made from hand-blown lead-free crystal. Any small bubbles, non-melts and inhomogeneities in the glass are not a reason for complaint. This is a characteristic feature of this traditional craft.
  • Page 4 Upon opening, first determine that Insert the dimmable light sources into there was no damage occurred during the sockets transport and that the light fixture is complete. Otherwise, please contact your seller immediately, as later claims may not be considered. Assemble the lighting fixture according to the manual, recognizing that its installation wiring may only be carried...
  • Page 5 Insert the glass parts into the hoops At the upper hoop the groove in the glass must fit the tube . The glass edges at the bottom of the mounting hoop must fit behind the pins At the lower ring, turn the glass so that the groove is on the left or right, but never at the top and bottom.
  • Page 6 Maintenance • When unpacking, installing and cleaning touch them with bare hands. Install them your fixture, handle the individual using clean textile gloves or tea towels. components with outmost care, When cleaning halogen bulbs, it is best to particularly the glass parts, which are use alcohol-based cleaners.
  • Page 7 Cleaning Important notice • All cleaning and maintenance must be • The producer bears no responsibility carried out when the power is off, ideally for damage caused by unprofessional entirely disconnected. installation or inappropriate handling • When cleaning, use fine-fabric gloves. of the light fixture, including installation Particularly avoid handling metal- with accessories other than those...
  • Page 8 Iron and steel 20 01 01 Paper and cardboard 15 01 05 Composite packaging Contact Bohemia Machine Ltd. 1177 Zámecká St. 58291 Světlá nad Sázavou Czech Republic +420 569 453 149 info@bomma.cz www.bomma.cz Instagram bomma_cz Facebook bommacz bomma.cz Control Date of packaging...
  • Page 9 Notes...
  • Page 10 Notes...
  • Page 11 Notes...
  • Page 12 step beyond...