Advertisement
5
Screw the diffuser
6
Attach the glass part
tightening the three screws
perimeter of the hoop
glass and make sure it is firmly held in the
hoop
Congratulations! You may now reconnect
the power and turn the light on.
When dismantling, first turn off the light and
disconnect from the power supply. Then
follow the above steps in reverse order. Use
the original or similar packaging for possible
later transport of the light fixture to prevent
damage.
into the thread of the central part with the LED light source
5
by gradual
1
on the
6
. Gently bend the
2
4
1
.
4
5
2
6
Advertisement
