Advertisement
Quick Links
Advertisement
Related Manuals for Bomma Blimp BOM1105724
Summary of Contents for Bomma Blimp BOM1105724
- Page 1 Design by Big-Game bomma...
- Page 3 • The dimensions and weight of glass parts may differ slightly, due to manual production. • All Bomma products are made from hand-blown lead-free crystal. Any small bubbles, non-melts and inhomogeneities in the glass are not a reason for complaint. This is a characteristic feature of this traditional craft.
- Page 4 Upon opening, first determine that there was no damage occurred during transport and that the light fixture is complete. Otherwise, please contact your seller immediately, as later claims may not be considered. Assemble the lighting fixture according to the manual, recognizing that its installation wiring may only be carried out by a qualified electrician following general legal regulations.
- Page 5 Slip the mounting on the incoming power supply cable and attach using appropriate screws and wall-plugs, which are not included in the package. Select their size and type according to the material of your wall and the weight of the fixture. Turn the mounting before screwing in so that the lead-in hole for the supply conductor is at the bottom.
- Page 6 Install the wiring according to the diagram. INPUT OUTPUT Attach the mirror to the inner fins of the mounting using two screws...
- Page 7 Screw the diffuser into the thread of the central part with the LED light source Attach the glass part by gradual tightening the three screws on the perimeter of the hoop . Gently bend the glass and make sure it is firmly held in the hoop Congratulations! You may now reconnect the power and turn the light on.
- Page 8 • Any other handling of the wall light fixture is required, please contact us at info@ should be performed by a qualified bomma.cz. If the light source is destroyed technician or directly by the producer. due to incorrect electrical installation, it is not possible to claim warranty for service replacement.
- Page 9 Cleaning Important Notice • All cleaning and maintenance must be • The producer bears no responsibility carried out when the power is off, ideally for damage cause by unprofessional entirely disconnected. installation or inappropriate handling • When cleaning, use fine-fabric gloves. of the light fixture, including installation Particularly avoid handling metal- with accessories other than those...
- Page 10 Iron and steel 20 01 01 Paper and cardboard 15 01 05 Composite packaging Contact Bohemia Machine Ltd. 1177 Zámecká St. 58291 Světlá nad Sázavou Czech Republic +420 569 453 149 info@bomma.cz www.bomma.cz Instagram bomma_cz Facebook bommacz bomma.cz Control Date of packaging...
- Page 11 Notes...
- Page 12 step beyond...