Input Settings - ViewSonic ViewBoard IFP33 Series User Manual

Input Settings

To select an input source:
1. Press INPUT on the remote control or touch the Menu icon (
Toolbar or the Input Source icon (
Settings menu.
2.
Press
q/p/t/u
NOTE:
The PC source will only be visible when a slot-in computer is installed.
3. Press ENTER on the remote control, or touch the input source.
4. Press BACK on the remote control, or touch a blank area outside of the menu to
exit.
To adjust the brightness:
1. Press INPUT on the remote control or touch the Menu icon (
the Input Source icon (
Toolbar or
Settings menu.
2. Touch and drag the brightness slider directly to adjust the backlight value.
3. Press BACK on the remote control, or touch a blank area outside of the menu to
exit.
on the remote control to select the input source you want.
) of the Control Bar
) of the Control Bar
45
) from the
to display the Input
) from the
to display the Input