Documentation Supplied; Packaging Of Hf Spindle; Designated Use; Permissible Types Of Machining - Jäger Z62-M445.01 S5 Manual

6 ( 36 )

Designated use

2.1.2

Documentation supplied

The documents listed below are supplied with the HF spindle:
q Manual
q The declaration of incorporation is part of the manual.
q
Inspection protocol
Ü
Check that the documentation supplied is complete when the spindle is
delivered. If necessary, request a new copy.
2.2

Packaging of HF spindle

All transport packaging materials can be recycled in appropriate disposal facil-
ities.
3 Designated use
The HF spindle is an "incomplete machine" in accordance with the Machinery
Directive and cannot perform any function independently. The HF spindle can
only be operated in conjunction with a machine tool and a frequency con-
verter.
3.1

Permissible types of machining

The HF spindle has been developed only for the following types of machining.
q Drilling
Ü
Contact Nakanishi Jaeger GmbH
3.2

Permissible materials

The HF spindle has been developed only for the following materials.
q
Metals (such as alloys, cast metals etc.)
q
Sintered materials
q
Plastics
q
Wood
q Graphite
q Stone (marble, etc.)
q Paper and cardboard
q Circuit boards
q Glass and ceramic
Ü
Contact Nakanishi Jaeger GmbH
if other types of machining are required.
if other materials are to be machined.
Item no. 10004021, Revision 02