2. Installation Preparation
2.1 Package Contents
Open the box of the EN-PEX4GBC and carefully unpack it, the box
should contain the following items:
2.2 Inspection
2.2.1 Connect the device to an 802.3bt standard or passive 90W
PSE or PoE switch and check the PoE Load Indicator is solid green
to ensure proper function before installation.
2.2.2 Connect the PoE port to the PoE powered device(PD). Such as
the IP Cameras or Wireless APs.
As showed in Figure 2-1;
!
04 Installation Preparation
EN-PEX4GBC
Caution:
Please use PoE powered device(PD) that complies with
IEEE802.3af/at to connect this product. Can not feed
non-802.3af/at standard PD, nor 24Vdc PD.25
Operation Manual