1. Manuals
  2. Brands
  3. Propel Trampolines Manuals
  4. Skateboards & Longboards
  5. PIVOT
  6. Operation manual

Propel Trampolines PIVOT Operation Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

OPERATION
MANUAL
FOR
PIVOT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PIVOT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Propel Trampolines PIVOT

Summary of Contents for Propel Trampolines PIVOT

  • Page 1 OPERATION MANUAL PIVOT...

  • Page 2: Quick Navigation

    QUICK NAVIGATION CONTENTS PIVOT COMPONENTS PRE-RIDE CHECKLIST POWER ON/OFF REMOTE CONTROL CHANGING WHEELS ALL PICTURES ARE FOR ILLUSTRATION AND ILLUSTRATION ONLY. DIFFERENT SERIES OF PIVOT PRODUCTS MAY DIFFER IN APPEAR- ANCE AND MATERIAL. PLEASE REFER TO THE ACTUAL PRODUCT. NOTE...
  • Page 3 PIVOT COMPONENTS 1. HEADLIGHT(OPTIONAL) 7. MOTOR 12. CHARGING PORT 2. FRONT BADGE 8. AT WHEEL 13. POWER BUTTON 3. PULL BAR(OPTIONAL) 9. PU WHEEL 14. BUSHING 4. DECK 10. DKP TRUCK 15. BELT 5. TAIL LIGHT 11. INTERNAL ACCESS 16. MOTOR PROTECTION BRACKET 6.

  • Page 4: Pre-Ride Checklist

    PRE-RIDE CHECKLIST BEFORE EACH RIDE, INSPECT YOUR BOARD AND REMOTE FOR DAMAGE. DO NOT RIDE IF DAMAGED. CHECK WHETHER THE PARTS ARE DEFORMED OR WORN. CHECK WHETHER THE SCREWS ARE LOOSE BEFORE USE AND OFTEN THROUGHOUT OWNERSHIP. AFTER THE SKATEBOARD IS STARTED, CHECK FOR ABNORMAL SOUNDS. DO NOT USE IT UNTIL THE CAUSE OF THE ABNORMAL SOUND IS FOUND AND RESOLVED.
  • Page 5 POWER ON: The power button is a self-reset switch, which is installed at the bottom of the PIVOT, close to the motor side. POWER OFF: Press the power button or leave the skateboard stationary for 5 minutes, and the skateboard will automatically...

  • Page 6: Remote Control

    REMOTE CONTROL...
  • Page 7 REMOTE PAIRING 1. Begin with the board and the remote turned off. 2. Turn on the board by depressing the power button, and release. The power button should illuminate. 3. Depress power button again and hold for 5-7 seconds utill it begins flash- ing, depress.

  • Page 8: Changing Wheels

    CHANGING WHEELS The wheel replacement of PIVOT 2-IN-1 is very simple. 1. Loosen the bolt next to the wheel. 2. Take the wheel and gear out. 3. Install the new wheel. 4. Tighten the nut. NOTE: PIVOT's default wheel size and gear ratio are pre-calculated for you to make wheel changing easier and simpler.

Table of Contents