Work Area Safety; Electrical Safety; Personal Safety - Ego Power+ LM2150E-SP Operator's Manual

Direct Current
kg Kilogram
GENERAL MACHINE SAFETY WARNINGS
WARNING:
READ ALL SAFETY WARNINGS,
INSTRUCTIONS, ILLUSTRATIONS AND SPECIFICATIONS
PROVIDED WITH THIS MACHINE . Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE
REFERENCE.
The term "machine" in the warnings refers to your mains-
operated (corded) machine or battery-operated (cordless)
machine.

WORK AREA SAFETY

◾
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
◾
Do not operate machines in explosive atmospheres,
such as in the presence of flammable liquids,
petrols or dust. Machines create sparks which may
ignite the dust or fumes.
◾
Keep children and bystanders away while
operating a machine. Distractions can cause you to
lose control.

ELECTRICAL SAFETY

◾
Machine plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) machines.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
◾
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
◾
Do not expose machines to rain or wet conditions.
Water entering a machine will increase the risk of
electric shock.
◾
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the machine. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
Type or a characteristic of
current
Weight
56 VOLT LITHIUM-ION CORDLESS MOWER — LM2150E-SP
◾
When operating a machine outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
◾
If operating a machine in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.

PERSONAL SAFETY

◾
Stay alert, watch what you are doing and use
common sense when operating a machine. Do
not use a machine while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating machines may
result in serious personal injury.
◾
Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
◾
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying machines with your finger on the
switch or energising machines that have the switch on
invites accidents.
◾
Remove any adjusting key or wrench before
turning the machine on. A wrench or a key left
attached to a rotating part of the machine may result in
personal injury.
◾
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the machine
in unexpected situations.
◾
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
◾
If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
◾
Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
7