1. Manuals
  2. Brands
  3. protech Manuals
  4. Monitor
  5. KS-1330
  6. User manual

protech KS-1330 User Manual

32” kitchen display system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER
MANUAL
KS-1330 M1
KS-1330
32" Kitchen
Display System

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KS-1330 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for protech KS-1330

Summary of Contents for protech KS-1330

  • Page 1 USER MANUAL KS-1330 32” Kitchen Display System KS-1330 M1...
  • Page 2 KS-1330 32” Kitchen Display System COPYRIGHT NOTICE & TRADEMARK All trademarks and registered trademarks mentioned herein are the property of their respective owners. This manual is copyrighted in August 2017. You may not reproduce or transmit in any form or by any means, electronic, or mechanical, including photocopying and recording.
  • Page 3 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Table Of Contents

    Contents Revision History ..................... vi Introduction ..................1-1 About This Manual ..............1-2 Getting Started ..................2-1 Package List ................2-2 System Overview ..............2-3 2.2.1 Front View ................. 2-3 2.2.2 Rear View ................2-3 2.2.3 Bottom View ..............2-4 2.2.4 Side View ................
  • Page 5 3.5.3 Power-On Mode Selection ..........3-10 3.5.4 Backlight Enable Selection ..........3-11 3.5.5 VGA/DVI Selection ............3-12 3.5.6 LVDS Resolution Selection..........3-13 3.5.7 COM3 PIN9 Definition Selection Guide ......3-14 3.5.8 COM4 PIN9 Definition Selection Guide ......3-14 3.5.9 Audio Port ................ 3-15 3.5.10 Battery Wafer ..............
  • Page 6 AD Board Jumper & Connector Quick Reference Table ..3-33 AD BOARD COMPONENT LOCATIONS ....... 3-34 3.7.1 Top View of KS-1330 AD Board ........3-34 Setting AD Board Connectors ..........3-35 3.8.1 Audio Line-in Jack ............3-35 3.8.2 DVI Connector ..............3-35 3.8.3...
  • Page 7 Save & Exit ................5-39 Appendix A System Diagrams ............1 KS-1330 System Exploded Diagram ..............2 KS-1330 Front Cover Exploded Diagram ............4 KS-1330 PCB Unit Exploded Diagram .............. 6 KS-1330 Heatsink Unit Exploded Diagram ............7 KS-1330 Power Unit Exploded Diagram ............8 KS-1330 HDD Exploded Diagram..............
  • Page 8 Appendix B Technical Summary ........... 1 System Block Diagram ..................2 Interrupt Map ......................3 I/O MAP ......................... 9 Memory Map ....................... 12 Configuring WatchDog Timer ................14 Flash BIOS Update .................... 17 List of Figures Figure 3-1. Main Board Component Location (Top View) ....3-4 Figure 3-2.

  • Page 9: Revision History

    Revision History The revision history of KS-1330 User Manual is described below: Version No. Revision History Page No. Date Initial Release 2017/08/10...

  • Page 10: Introduction

    Introduction This chapter provides the introduction for the KS-1330 system as well as the framework of the user manual. The following topic is included: • About This Manual KS-1330 SERIES USER MANUAL Page: 1-1...

  • Page 11: About This Manual

    Chapter 1 Introduction About This Manual Thank you for purchasing our KS-1330 system. The KS-1330 is an updated system designed to be comparable with the highest performance of IBM AT personal computers. The KS-1330 provides faster processing speed, greater expandability and can handle more tasks than before.

  • Page 12: Getting Started

    Getting Started This chapter provides the information for the KS-1330 system. It describes how to set up the system quickly and outlines the system specifications. The following topics are included: • Package List • System Overview • System Diagrams • System Specification •...

  • Page 13: Package List

    If you discover any of the items listed below are damaged or lost, please contact your local distributor immediately. Item Q’ty KS-1330 Manual / Driver DVD Quick Guide Mini Jumper (2 mm) AC Power Cord KS-1330 SERIES USER MANUAL Page: 2-2...

  • Page 14: System Overview

    Chapter 2 Getting Started System Overview Unit: mm 2.2.1 Front View 773.8 468.4 2.2.2 Rear View M6x6 (Deep 10mm) 69.20 COM3 USB2 USB1 LINE OUT AC IN KS-1330 SERIES USER MANUAL Page: 2-3...

  • Page 15: Bottom View

    Chapter 2 Getting Started 2.2.3 Bottom View 2.2.4 Side View 84.10 0.80 2.2.5 Quarter View KS-1330 SERIES USER MANUAL Page: 2-4...

  • Page 16: System Specifications

    32” Bezel-free projected capacitive touchscreen Max. Resolution 1920 x 1080 dots Brightness Typical 500 cd/m2 Display Area 698.4(H) x 392.85(W) Environment Operating Temperature 0°C ~ 40°C (32°F~ 104°F) Storage Temperature -5°C ~ 60°C (23°F~ 140°F) Humidity 20%~ 85% KS-1330 SERIES USER MANUAL Page: 2-5...

  • Page 17: Safety Precautions

    Avoid direct sunlight exposure for a long period of time (for example, in a closed car in summer time. Also avoid the system from any heating device.). Or do not use KS-1330 when it has been left outdoors in a cold winter day. •...

  • Page 18: System Configuration

    The following topics are included: • External I/O Ports Diagram • Main Board Jumper Settings and Component Locations • How to Set Jumpers • Setting Main Board Connectors and Jumpers KS-1330 SERIES USER MANUAL Page: 3-1...

  • Page 19: Rear I/O Ports Diagram

    Chapter 3 Hardware Configuration External I/O Ports Diagram 3.1.1 Rear I/O Ports Diagram COM3 USB2 USB1 LAN LINE OUT AC IN KS-1330 SERIES USER MANUAL Page: 3-2...

  • Page 20: Jumper & Connector Quick Reference Table

    JDIO1 Front Connector JFP1 Inverter Wafer JINV1 KB/MS Port JKB_MS1 LAN & USB2.0 Port JLAN_USB1 LAN& USB2.0/3.0 Port JLAN_USB2 LVDS Connector JLVDS1 SATA Connector JSATA1, JSATA2 SATA Power Connector JSATA_PWR1, JSATA_PWR2 USB Connector JUSB1 KS-1330 SERIES USER MANUAL Page: 3-2...
  • Page 21 Chapter 3 Hardware Configuration CONNECTOR Description NAME MINI PCIE Connector M_PCI_E1 PCIE BUS PCI_E1 LPC Connector JLPC1 KS-1330 SERIES USER MANUAL Page: 3-3...

  • Page 22: Component Locations

    Make sure both the system and peripheral devices are turned OFF as sudden surge of power could damage sensitive components. Make sure KS-1330 is properly grounded. CAUTION: Observe precautions while handling electrostatic sensitive components. Make sure to ground yourself to prevent static charge while you are working on the connectors and jumpers.
  • Page 23 CAUTION: Always touch the motherboard components by the edges. Never touch components such as a processor by its pins. Take special cares while you are holding electronic circuit boards by the edges only. Do not touch the mainboard components. KS-1330 SERIES USER MANUAL Page: 3-5...

  • Page 24: Setting Jumpers

    2 to create one setting and shorting. You can also select to connect pins 2 and 3 to create another setting. The format of the jumper picture will be illustrated throughout this manual. The figure below shows different types of jumpers and jumper settings. KS-1330 SERIES USER MANUAL Page: 3-6...
  • Page 25 Chapter 3 Hardware Configuration Jumper diagrams Jumper settings KS-1330 SERIES USER MANUAL Page: 3-7...

  • Page 26: Setting Main Board Connectors And Jumpers

    Chapter 3 Hardware Configuration Setting Main Board Connectors and Jumpers 3.5.1 LVDS Power Selection Jumper Name: JP4 Description: LVDS Power Selection JUMPTER SELECTION JUMPER ILLUSTRATION SETTING 3.3V (Default Setting) KS-1330 SERIES USER MANUAL Page: 3-8...

  • Page 27: Backlight Inverter Pwm Voltage Selection

    Chapter 3 Hardware Configuration 3.5.2 Backlight Inverter PWM Voltage Selection Jumper Name: JP5 Description: Backlight Inverter PWM Voltage Selection JUMPTER SELECTION JUMPER ILLUSTRATION SETTING 3.3V (Default Setting) KS-1330 SERIES USER MANUAL Page: 3-9...
  • Page 28 JUMPER ILLUSTRATION SETTING Auto-On (Default Setting) Select by BIOS Note 1: Manufacturing default for BS-H292 (SBOX) is "NC". Note 2: Auto-On means that system will turn on automatically whenever the main power is restored. KS-1330 SERIES USER MANUAL Page: 3-10...
  • Page 29 Chapter 3 Hardware Configuration 3.5.4 Backlight Enable Selection Jumper Name: JP9 Description: Backlight Enable Selection JUMPTER SELECTION JUMPER ILLUSTRATION SETTING (Default Setting) 3.3V KS-1330 SERIES USER MANUAL Page: 3-11...
  • Page 30 Chapter 3 Hardware Configuration 3.5.5 VGA/DVI Selection Jumper Name: JP10 Description: VGA/DVI Selection JUMPTER SELECTION JUMPER ILLUSTRATION SETTING (Default Setting) JP10 JP10 KS-1330 SERIES USER MANUAL Page: 3-12...
  • Page 31 Chapter 3 Hardware Configuration 3.5.6 LVDS Resolution Selection Jumper Name: JP14 & JP15 Description: LVDS Resolution Selection JUMPTER SELECTION JUMPER ILLUSTRATION SETTING JP15(2-4) JP15(1-3) 1920x1080 JP14(2-4) 2CH/24bit JP14(3-5) JP14 JP15 (Default Setting) KS-1330 SERIES USER MANUAL Page: 3-13...
  • Page 32 COM4 PIN9 Definition Selection Guide Jumper Name: JP_COM4 Description: COM4 Port pin9 RI/5V/12V Selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION (Default Setting) JP_COM4 +12V JP_COM4 JP_COM4 Note: Manufacturing default for BS-H292 (SBOX)) is 5V (5-6). KS-1330 SERIES USER MANUAL Page: 3-14...
  • Page 33 Chapter 3 Hardware Configuration 3.5.9 Audio Port Port Name: JAUDIO1 Description: Line-In, Line-Out & Microphone The connector can also support only Microphone. Line-In: ASSIGNMENT LINE-IN-L LINE-IN-R Line-Out: ASSIGNMENT LINE-OUT-L LINE-OUT-R Mic-In: JAUDIO1 ASSIGNMENT MIC_L MIC_R Others: ASSIGNMENT KS-1330 SERIES USER MANUAL Page: 3-15...
  • Page 34 Description: COM2 and COM3 Ports ASSIGNMENT JCOM2_3 Note: COM3 Pin 9 is selectable for RI, +5V or +12V by jumper setting. Default setting is 12V. Please see “COM3 PIN9 Definition Selection Guide” for selection details. KS-1330 SERIES USER MANUAL Page: 3-16...
  • Page 35 Description: COM4 Connector ASSIGNMENT ASSIGNMENT JCOM4 Note: COM4 Pin 9 is selectable for RI, +5V or +12V by jumper setting. Default setting is RI. Please see “COM4 PIN9 Definition Selection Guide” for selection details. KS-1330 SERIES USER MANUAL Page: 3-17...
  • Page 36 Chapter 3 Hardware Configuration 3.5.13 COM5 Connector Connector Name: JCOM5 Description: COM5 Connector ASSIGNMENT ASSIGNMENT JCOM5 3.5.14 COM6 Connector Connector Name: JCOM6 Description: COM6 Connector ASSIGNMENT ASSIGNMENT JCOM6 KS-1330 SERIES USER MANUAL Page: 3-18...
  • Page 37 Description: DVI-I & COM Port Connector Name: DVI-I Description: DVI Connector ASSIGNMENT ASSIGNMENT TMDS_D2- TMDS_D2+ DDC_CLK DDC_DATA VSYNC TMDS_D1- TMDS_D1+ JCOM_DVII1 TMDS_D0- TMDS_D0+ TMDS_CLK+ TMDS_CLK- GREEN BLUE HSYNC Connector Name: COM1 Description: COM Connector ASSIGNMENT KS-1330 SERIES USER MANUAL Page: 3-19...
  • Page 38 Connector Name: JCPU_FAN1 Description: CPU Fan Connector ASSIGNMENT FAN_CONTROL FAN_SIGNAL JCPU_FAN1 Connector Name: JSYS_FAN1 Description: System Fan Connector ASSIGNMENT FAN_CONTROL FAN_SIGNAL JSYS_FAN1 3.5.17 DC 12V Connector Connector Name: JDC_PWR1 Description: DC 12V Connector ASSIGNMENT JDC_PWR1 KS-1330 SERIES USER MANUAL Page: 3-20...
  • Page 39 DIN2 DOUT2 DIN3 DOUT3 JDIO1 3.5.19 Front Panel Connector Connector Name: JFP1 Description: Front Panel Connector ASSIGNMENT ASSIGNMENT HDD_LED+ PWR_LED+ JFP1 HDD_LED- PWR_LED- SPK_VCC RESET SWITCH SPEAKER SIGNAL POWER BUTTON POWER BUTTON SPEAKER SIGNAL KS-1330 SERIES USER MANUAL Page: 3-21...
  • Page 40 Chapter 3 Hardware Configuration 3.5.20 Inverter Wafer Connector Name: JINV1 Description: Inverter Wafer ASSIGNMENT PWM SIGNAL BACKLIGHT EN JINV1 KS-1330 SERIES USER MANUAL Page: 3-22...
  • Page 41 Chapter 3 Hardware Configuration 3.5.21 KB/MS Port Port Name: JKB_MS1 Description: KB/MS Port Keyboard: ASSIGNMENT DATA Mouse: ASSIGNMENT DATA JKB_MS1 KS-1330 SERIES USER MANUAL Page: 3-23...
  • Page 42 Chapter 3 Hardware Configuration 3.5.22 LAN & USB 2.0 Port Port Name: JLAN_USB1 Description: LAN & USB2.0 Port Yellow Orange/ Green USB2.0: LAN: ASSIGNMENT ASSIGNMENT TX_D1+ TX_D1- RX_D2+ BI_D3+ BI_D3- RX_D2- BI_D4+ BI_D4- JLAN_USB1 KS-1330 SERIES USER MANUAL Page: 3-24...
  • Page 43 Chapter 3 Hardware Configuration 3.5.23 LAN& USB2.0/3.0 Port Port Name: JLAN_USB2 Description: LAN & USB2.0/3.0 Port LAN: Yellow Orange/ ASSIGNMENT TX_D1+ Green TX_D1- RX_D2+ BI_D3+ BI_D3- RX_D2- BI_D4+ BI_D4- USB2.0: ASSIGNMENT VBUS STDA_SSRX- STDA_SSRX+ JLAN_USB2 STDA_SSTX- STDA_SSTX+ KS-1330 SERIES USER MANUAL Page: 3-25...
  • Page 44 LVDS Connector Connector Name: JLVDS1 Description: LVDS Connector JLVDS1 ASSIGNMENT ASSIGNMENT LVDS_VCC LVDS1_CLK- LVDS1_CLK+ LVDS1_D2- LVDS1_D2+ LVDS1_D1- LVDS1_D1+ LVDS1_D3+ LVDS1_D3- LVDS1_D0+ LVDS1_D0- LVDS0_CLK+ LVDS0_CLK- LVDS0_D2+ LVDS0_D2- LVDS0_D1+ LVDS0_D1- LVDS0_D0+ LVDS0_D0- LVDS0_D3+ LVDS0_D3- LVDS_VCC LVDS_VCC KS-1330 SERIES USER MANUAL Page: 3-26...
  • Page 45 Chapter 3 Hardware Configuration 3.5.25 SATA Connector Connector Name: JSATA1, JSATA2 Description: Two Serial ATA Connectors ASSIGNMENT JSATA1/ JSATA2 3.5.26 SATA Power Connector Connector Name: JSATA_PWR1, JSATA_PWR2 Description: Two SATA Power Connectors ASSIGNMENT JSATA_PWR1/ JSATA_PWR2 KS-1330 SERIES USER MANUAL Page: 3-27...
  • Page 46 Chapter 3 Hardware Configuration 3.5.27 USB Connector Connector Name: JUSB1 Description: USB Connector ASSIGNMENT ASSIGNMENT JUSB1 KS-1330 SERIES USER MANUAL Page: 3-28...
  • Page 47 MINI PCIE Connector Connector Location: M_PCI_E1 Description: MINI PCIE Connector ASSIGNMENT ASSIGNMENT WAKE# 3.3V 1.5V CLKREQ# REFCLK- REFCLK+ PERST# PERn0 3.3V PERp0 1.5V SMB_CLK PETn0 SMB_DATA PETp0 M_PCI_E1 USB_D- USB_D+ 3.3V 3.3V 1.5V 3.3V KS-1330 SERIES USER MANUAL Page: 3-29...
  • Page 48 Chapter 3 Hardware Configuration 3.5.29 PCIE Bus Connector Location: PCI_E1 Description: PCIE Bus ASSIGNMENT ASSIGNMENT SMB_CLK SMB_DATA 3.3V 3.3V 3.3V 3.3V_SB PCI_E1 PWRGD WAKE# REFCLK+ REFCLK- HSOP0 HSON0 HSIP0 HSIN0 PRSNT# KS-1330 SERIES USER MANUAL Page: 3-30...
  • Page 49 Chapter 3 Hardware Configuration 3.5.30 LPC Connector Connector Location: JLPC1 Description: LPC Connector ASSIGNMENT ASSIGNMENT FRAME RESET VCC5 LAD3 LAD2 VCC3 LAD1 JLPC1 LAD0 SMBCLK SMBDATA 3VSB SERIRQ CLK RUN SUS_TAT DREQ0 KS-1330 SERIES USER MANUAL Page: 3-31...
  • Page 50 Step 4. Power on the PC and the PC will then auto-reboot for once in order to set SoC’s register. Step 5. Done! SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Open Normal (Default Setting) Clear CMOS Close Data Note: Please make sure the main power is off before you clear CMOS. KS-1330 SERIES USER MANUAL Page: 3-32...
  • Page 51 3.3V / 5V/ 12V Selection PWM / Analog Selection CONNECTOR Description NAME Audio Line-in Jack DVI Connector LCD Panel for LVDS Connector Key Pad Connector Inverter Connector UART Connector IR Connector Ext. Amp. Connector KS-1330 SERIES USER MANUAL Page: 3-33...

  • Page 52: Figure 3-2. Ad Board Component Location (Top View)

    Chapter 3 Hardware Configuration AD BOARD COMPONENT LOCATIONS 3.7.1 Top View of KS-1330 AD Board Figure 3-2 AD Board Component Location (Top View) KS-1330 SERIES USER MANUAL Page: 3-34...
  • Page 53 Audio Line-in Jack Jumper Location: CN3 Description: Audio Line-in Jack ASSIGNMENT 3.8.2 DVI Connector Jumper Location: CN4 Description: DVI Connector ASSIGNMENT ASSIGNMENT TMD_D2- TMD_D2+ DDC_CLK DDC_DATA VSYNC TMDS_D1- TMDS_D1+ TMDS_0- TMDS_D0+ TMDS_CLK+ TMDS_CLK- GREEN BLUE HSYNC KS-1330 SERIES USER MANUAL Page: 3-35...
  • Page 54 Description: Panel B+ 3.3V / 5V / 12V Selection SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION 3.3V 3.8.4 PWM / Analog Selection Jumper Location: JP2 Description: PWM / Analog Selection SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Analog KS-1330 SERIES USER MANUAL Page: 3-36...
  • Page 55 LCD Panel for LVDS Connector Jumper Location: J5 Description: LCD Panel for LVDS Connector ASSIGNMENT ASSIGNMENT RXOIN3- RXOIN3+ RXOINC- RXOINC+ RXOIN2- RXOIN2+ RXEIN3- RXOIN1- RXEIN3+ RXOIN1+ RXEINC- RXOIN0 RXEINC+ RXOIN0+ RXEIN2- RXEIN2+ RXEIN1- RXEIN1+ RXEIN0 RXEIN0+ KS-1330 SERIES USER MANUAL Page: 3-37...
  • Page 56 Brightness control ON/OFF Control 7, 8 5V Input / Output Note: Pins 1~5 are used for standard 12V input and stand alone Inverter. Pins 6~8 are used for power supply with 5V input . KS-1330 SERIES USER MANUAL Page: 3-38...
  • Page 57 Jumper Location: J9 Description: UART Connector ASSIGNMENT Key2 3.8.9 IR Connector Jumper Location: J11 Description: IR Connector ASSIGNMENT JP11 3.8.10 Ext. Amp. Connector Jumper Location: J12 Description: Ext. Amp. Connector ASSIGNMENT L_10W R_10W Mute_AMP STB_AMP JP12 KS-1330 SERIES USER MANUAL Page: 3-39...
  • Page 58 • Installing Intel ® Chipset Software Installation Utility • Installing Intel ® Trusted Execution Engine Installation Utility • Installing USB 3.0 eXtensible Host Controller Utility • Installing Graphics Driver Utility • Installing LAN Driver Utility • Installing Sound Driver Utility KS-1330 SERIES USER MANUAL Page: 4-1...
  • Page 59 Chapter 4 Software Utilities Introduction Enclosed with the KS-1330 Series package is our driver utilities contained in a DVD-ROM disk. Refer to the following table for driver locations: Filename (Assume that DVD- Win7 Purpose ROM drive is D :) (32/64 bit) For Aptio(EFI) BIOS update ...
  • Page 60 7/10 series, and it should be installed immediately after the OS installation is finished. Please follow the steps below: Connect the USB DVD-ROM device to KS-1330 and insert the driver disk. Enter the Main Chip folder where the Chipset driver is located.
  • Page 61 ® Installation Instructions for Intel Trusted Execution Engine Installation Utility Connect the USB DVD-ROM device to KS-1330 and insert the driver disk. Enter the TXE folder where the driver is located. Select Windows 7 (32/64-bit) for your OS platform. Click SetupTXE.exe file for TXE driver installation.
  • Page 62 To install the utility, follow the steps below: Insert the driver disk into a DVD-ROM device. Under Windows system, go to the directory where the driver is located. Run the application with administrative privileges. KS-1330 SERIES USER MANUAL Page: 4-5...
  • Page 63 Chapter 4 Software Utilities Installing Graphics Driver Utility To install the Graphics driver utility, follow the steps below: Connect the USB DVD-ROM device to KS-1330 and insert the driver disk. Enter the Graphic folder where the driver is located. Select Windows 7 (32/64-bit) / Windows 10 (64-bit) for your OS platform.
  • Page 64 Enhanced with LAN function, KS-1330 supports various network adapters. To install the LAN Driver, follow the steps below: Connect the USB DVD-ROM device to KS-1330 and insert the driver disk. Enter the LAN Chip folder where the driver is located.
  • Page 65 Windows 7 / 10 series. To install the Sound Driver, follow the steps below: Connect the USB DVD-ROM device to KS-1330 and insert the driver disk. Open the Sound Codec folder where the driver is located. Select Windows 7 (32/64-bit) / Windows 10 (64-bit) for your OS platform.
  • Page 66 The BIOS Setup Utilities consist of the following menu items: • Accessing Setup Utilities • Main Menu • Advanced Menu • Chipset Menu • Security Menu • Boot Menu • Save & Exit Menu KS-1330 SERIES USER MANUAL Page: 5-1...

  • Page 67: Figure 5-1. Extensible Firmware Interface Diagram

    Chapter 5 BIOS Setup Introduction The KS-1330 System uses an AMI (American Megatrends Incorporated) Aptio BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated. The SPI Flash contains the built-in BIOS setup program, Power-On Self-Test (POST), PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support.
  • Page 68 All the menu settings are described in details in this chapter. Accessing Setup Utility After the system is powered on, BIOS will enter the Power-On Self-Test (POST) routines and the POST message will be displayed: KS-1330 SERIES USER MANUAL Page: 5-3...

  • Page 69: Figure 5-2. Post Screen With Ami Logo

    Chapter 5 BIOS Setup Figure 5-2. POST Screen with AMI Logo Press <Del> or <Esc> to access the Setup Utility program and the Main menu of the Aptio Setup Utility will appear on the screen as below: KS-1330 SERIES USER MANUAL Page: 5-4...
  • Page 70 US English. You may use <↑> or <↓> key to select among the items and press <Enter> to confirm and enter the sub-menu. The following table provides the list of the navigation keys that you can use while operating the BIOS setup menu. KS-1330 SERIES USER MANUAL Page: 5-5...
  • Page 71 Load the previous configuration values. <F3> Load the default configuration values. <F4> Save the current values and exit the BIOS setup menu. <Esc> Close the sub-menu. Trigger the confirmation to exit BIOS setup menu. KS-1330 SERIES USER MANUAL Page: 5-6...
  • Page 72 No changeable options Displays the version of the BIOS currently installed on the platform. Build Date and No changeable options Displays the date of current BIOS version. Time BayTrail SoC No changeable options SoC stepping KS-1330 SERIES USER MANUAL Page: 5-7...
  • Page 73 Sets the system time. The format is [Hour: Minute: Second]. Users can directly enter values or use <+> or <-> arrow keys to increase/decrease it. Access Level No changeable options Displays the access level as “Administrator”. KS-1330 SERIES USER MANUAL Page: 5-8...
  • Page 74 F81866 Watchdog Sub-Menu F81866 Watchdog Parameters. CPU Configuration Sub-Menu CPU Configuration Parameters. IDE Configuration Sub-Menu SATA Configuration Parameters. CSM Configuration Sub-Menu Configures Option ROM execution, boot options filters, etc. USB Configuration Sub-Menu USB Configuration Parameters. KS-1330 SERIES USER MANUAL Page: 5-9...
  • Page 75 OS. ACPI Sleep State - Suspend Disabled Specifies the ACPI sleep state. • - S3 Only (Suspend Suspend Disabled disables ACPI to RAM) sleep feature. • S3 allows the platform to enter KS-1330 SERIES USER MANUAL Page: 5-10...
  • Page 76 Sets the parameters of Serial Port 2 Serial Port 2 Configuration Sub-menu (COMB). Sets the parameters of Serial Port 3 Serial Port 3 Configuration Sub-menu (COMC). Sets the parameters of Serial Port 4 Serial Port 4 Configuration Sub-menu (COMD). KS-1330 SERIES USER MANUAL Page: 5-11...
  • Page 77 No changeable options of Serial Port 1. Change Settings - IO=3F8h; IRQ=4 Allows you to select specific - IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 IO address and IRQ for Serial - IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 Port 1. - IO=3E8h;IRQ=3,4,5,6,7,9,10,11,12 - IO=2E8h;IRQ=3,4,5,6,7,9,10,11,12 KS-1330 SERIES USER MANUAL Page: 5-12...
  • Page 78 No changeable options of Serial Port 2. Change Settings - IO=2F8h; IRQ=3 Allows you to select specific - IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 IO address and IRQ for Serial - IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 Port 2. - IO=3E8h;IRQ=3,4,5,6,7,9,10,11,12 - IO=2E8h;IRQ=3,4,5,6,7,9,10,11,12 KS-1330 SERIES USER MANUAL Page: 5-13...
  • Page 79 No changeable options of Serial Port 3. Change Settings - IO=3E8h; IRQ=10 Allows you to select specific - IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 IO address and IRQ for Serial - IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 Port 3. - IO=2F0h;IRQ=3,4,5,6,7,9,10,11,12 - IO=2E0h;IRQ=3,4,5,6,7,9,10,11,12 KS-1330 SERIES USER MANUAL Page: 5-14...
  • Page 80 Device Settings No changeable options of Serial Port 4. Change Settings - IO=2E8h; IRQ=5 Allows you to select specific - IO=3E8h;IRQ=3,4,5,6,7,9,10,11,12 IO address and IRQ for Serial - IO=2E8h;IRQ=3,4,5,6,7,9,10,11,12 Port 4. - IO=2F0h;IRQ=3,4,5,6,7,9,10,11,12 - IO=2E0h;IRQ=3,4,5,6,7,9,10,11,12 KS-1330 SERIES USER MANUAL Page: 5-15...
  • Page 81 Device Settings No changeable options of Serial Port 5. Change Settings - IO=2F0h; IRQ=7 Allows you to select specific - IO=3E8h;IRQ=3,4,5,6,7,9,10,11,12 IO address and IRQ for Serial - IO=2E8h;IRQ=3,4,5,6,7,9,10,11,12 Port 5. - IO=2F0h;IRQ=3,4,5,6,7,9,10,11,12 - IO=2E0h;IRQ=3,4,5,6,7,9,10,11,12 KS-1330 SERIES USER MANUAL Page: 5-16...
  • Page 82 Device Settings No changeable options of Serial Port 6. Change Settings - IO=2E0h; IRQ=7 Allows you to select specific - IO=3E8h;IRQ=3,4,5,6,7,9,10,11,12 IO address and IRQ for Serial - IO=2E8h;IRQ=3,4,5,6,7,9,10,11,12 Port 6. - IO=2F0h;IRQ=3,4,5,6,7,9,10,11,12 - IO=2E0h;IRQ=3,4,5,6,7,9,10,11,12 KS-1330 SERIES USER MANUAL Page: 5-17...
  • Page 83 No changeable options the VSB5V in supply. VCC5 Detects and displays voltage level of No changeable options the VCC5V in supply. VCC12 Detects and displays voltage level of No changeable options the VCC12 in supply. KS-1330 SERIES USER MANUAL Page: 5-18...
  • Page 84 Selects 1s (second) or 60s (minute) as Watchdog timer unit - 60s the time unit of Watchdog timer. Count for Timer Numeric Sets the timeout for Watchdog timer. (Seconds) (from 1 to 255) (Max. value: 255 seconds or minutes) KS-1330 SERIES USER MANUAL Page: 5-19...
  • Page 85 BIOS Setting Options Description/Purpose Socket 0 CPU Sub-Menu Reports CPU Information Information CPU Speed No changeable options Reports the current CPU Speed. 64-bit No changeable options Reports if the processor supports Intel x86-64 (amd64) implementation. KS-1330 SERIES USER MANUAL Page: 5-20...
  • Page 86 Displays L1 Data Cache size. L1 Code Cache No changeable options Displays L1 Code Cache size. L2 Cache No changeable options Displays L2 Cache size. L3 Cache No changeable options Displays L3 Cache size. KS-1330 SERIES USER MANUAL Page: 5-21...
  • Page 87 - Enabled • SATA Speed Support - Gen1 Gen1 mode sets the device to 1.5 - Gen2 Gbit/s speed. • Gen2 mode sets the device to 3 Gbit/s speed (in case it is compatible). KS-1330 SERIES USER MANUAL Page: 5-22...
  • Page 88 Advanced – CSM Configuration 5.4.7 Menu Path Advanced > CSM Configuration The CSM Configuration provides advanced CSM (Compatibility Support Module) configurations such as Enable/Disable CSM Support, configure Option ROM execution, boot option filter, etc. CSM Configuration Screen KS-1330 SERIES USER MANUAL Page: 5-23...
  • Page 89 Controls the execution of UEFI and Legacy Video. - UEFI - Legacy Other PCI - Do not launch Select launch method for other PCI devices devices, such as NIC, mass storage or - UEFI video card. - Legacy KS-1330 SERIES USER MANUAL Page: 5-24...
  • Page 90 USB Mass Storage Driver - Disabled Enables/Disables USB mass storage driver Support. support. - Enabled USB transfer time-out 1 / 5 / 10 /20 sec The time-out value for Control, Bulk, and Interrupt transfers. KS-1330 SERIES USER MANUAL Page: 5-25...
  • Page 91 100 ms, for a Hub port the delay is taken from Hub descriptor. Mass Storage Devices: - Auto Displays the device name and choose the device emulation type. - Force FDD - Hard Disk - CD-ROM KS-1330 SERIES USER MANUAL Page: 5-26...
  • Page 92 This menu allows users to configure advanced Chipset settings such as North Bridge and South Bridge configuration parameters. Chipset Screen BIOS Setting Options Description/Purpose North Bridge Sub-menu Sets Parameter for (North Bridge) configuration. South Bridge Sub-menu Sets Parameter for (South Bridge) configuration. KS-1330 SERIES USER MANUAL Page: 5-27...
  • Page 93 Total Memory No changeable options Displays the DRAM size Max TOLUD - 2 GB Maximum Value of TOLUD (Top of Low Usable DRAM). - 2.25 GB - 2.5 GB - 2.75 GB - 3 GB KS-1330 SERIES USER MANUAL Page: 5-28...
  • Page 94 Description/Purpose Primary IGFX - VBIOS Default Select the video Device which will be Boot Display activated during POST. This has no effect - CRB if an external graphics is present. - DVI - LVDS KS-1330 SERIES USER MANUAL Page: 5-29...
  • Page 95 • Power On makes the system power on after AC power is restored to the board. • Last State brings the system back to the last power state before AC power is removed. KS-1330 SERIES USER MANUAL Page: 5-30...
  • Page 96 The Azalia HD Audio allows users to control the detection of the Azalia device. Azalia HD Audio Screen BIOS Setting Options Description/Purpose Audio Controller - Disabled Controls the detection of the Azalia device. - Enabled KS-1330 SERIES USER MANUAL Page: 5-31...
  • Page 97 Controls each of the USB ports (0~3). • - Enabled Enabled: Enable USB per port • Disabled: Use USB port X settings. USB Port 0 - Disabled Enables or Disables USB port 0. - Enabled KS-1330 SERIES USER MANUAL Page: 5-32...
  • Page 98 Enables or Disables USB port 1 - Enabled (USB Hub 1~4). USB Port 2 - Disabled Enables or Disables USB port 2. - Enabled USB Port 3 - Disabled Enables or Disables USB port 3. - Enabled KS-1330 SERIES USER MANUAL Page: 5-33...
  • Page 99 Setup utility. Security Screen BIOS Setting Options Description/Purpose Administrator Password can be 3-20 Specifies the administrator password. Password alphanumeric characters. Password can be 3-20 User Password Specifies the user password. alphanumeric characters. KS-1330 SERIES USER MANUAL Page: 5-34...
  • Page 100 2. Select the configured Administrator Password or User Password that you want to delete. Leave the dialog box blank and press <Enter>. 3. Press <Enter> again when the password confirmation box appears. KS-1330 SERIES USER MANUAL Page: 5-35...
  • Page 101 NumLock State NumLock Key. - Off Quiet Boot - Disabled Enables/Disables Quiet Boot Options - Enabled Boot Option - [Drive(s)] Allows to set the boot option listed in #1~#n Hard Drive BBS Priorities. - Disabled KS-1330 SERIES USER MANUAL Page: 5-36...
  • Page 102 BBS Priorities available drive(s) Boot – Hard Drive BBS Priorities Hard Drive BBS Priorities BIOS Setting Options Description/Purpose Boot Option #1 - #n - [Drive(s)] Change the boot order of available drive(s). - Disabled KS-1330 SERIES USER MANUAL Page: 5-37...
  • Page 103 Chapter 5 BIOS Setup Boot – Network Drive BBS Priorities Network Drive BBS Priorities BIOS Setting Options Description/Purpose Boot Option #1 - #n - [Drive(s)] Change the boot order of available drive(s). - Disabled KS-1330 SERIES USER MANUAL Page: 5-38...
  • Page 104 Discard Changes and Reset to discard any changes you have made and restore the factory BIOS defaults. Load User Defaults You may simply press F3 at any time to load the Optimized Values which resets all BIOS settings to the factory defaults. Save & Exit Screen KS-1330 SERIES USER MANUAL Page: 5-39...
  • Page 105 Loads the optimized defaults for BIOS settings. Save as User No changeable options Save as user default values. Defaults Restore User No changeable options Restores user defaults. Defaults Boot Override - [Drive(s)] Forces to boot from selected [drive(s)]. KS-1330 SERIES USER MANUAL Page: 5-40...
  • Page 106 This appendix includes the exploded diagrams of the system and the parts list as well as the part numbers of the KS-1330 system. • KS-1330 System Exploded Diagram • KS-1330 Front Cover Exploded Diagram • KS-1330 PCB Unit Exploded Diagram • KS-1330 Heatsink Unit Exploded Diagram •...
  • Page 107 Appendix A System Diagrams KS-1330 System Exploded Diagram Q’ty Component Name P/N No. KS-1330_Front_Unit KS-1330_Power_Unit KS-1330_LVDS_Cable L=400mm 27-020-40808111 Round Washer Head Screw 22-242-30005311 M3x0.5Px5mm KS-1330_PCB_Unit KS-1330_Inside_Audio_Cable L=650mm 27-028-40813111 KS-1330_DVI-Cable L=250mm 27-047-40805111 Pan Head Screw No.4, L=4mm 22-322-40004311 KS-1330_IO_Unit KS-1330_Outside_Back_Cover 20-004-02062408 KS-1330_HDD_UNIT Fillister Head Screw #2 /M4x0.7Px8mm...
  • Page 108 Appendix A System Diagrams KS-1330 System Exploded Diagram Q’ty Component Name P/N No. HDD_Outside_Door_EVA 90-013-15100408 HDD_Outside_Door 20-047-02061408 Flat Head Screw #2/ψ 5/ M3x0.5Px6mm 22-212-30006311 LCD AD_Board 52-152-20658330 KS-1330_HDD_Holder 20-029-02024408 SATA_HDD&Power Cable L=390mm 27-012-28408081 KS-1330_Speaker_Extend_Cable (4p to 27-021-40808111 2p), L=400mm 32_Cap_Touch_PCB_Holder...
  • Page 109 Appendix A System Diagrams KS-1330 Front Cover Exploded Diagram Q’ty Component Name P/N No. 32" Capacitive Muti-Touch Panel 52-380-07032017 M320H_Double Faced Adhesive tape-V 34-026-05802408 M320H_Double Faced Adhesive tape-H 34-026-05801408 KS-1330_Front_Cover 20-004-02063408 Speaker_Filem 30-083-02100408 KS-1330_Power Button Cable, L=600mm 27-019-40812071 Panel_ADD-L 20-006-02021408...
  • Page 110 Appendix A System Diagrams KS-1330 Front Cover Exploded Diagram Q’ty P/N No. Component Name Flat Head Screw #2/ M3x0.5Px4mm 22-215-30004311 Flat Head Screw M4x0.7Px5mm 22-212-40005011 Washer_ID6.5mm_OD13mm_T1_Ni 23-312-07010131 Panel_ADD-R 20-006-02022408 V_Holder-A 20-029-02027408 V_Holder-C 20-029-02028408 Round Head Screw M5x0.8Px6mm 22-232-50006011 KS-1330_Back_Cover_Rubber-C 90-013-06200408...
  • Page 111 Appendix A System Diagrams KS-1330 PCB Unit Exploded Diagram Q’ty Component Name P/N No. KS-1330_PCB_Holder 20-029-02025408 BM-0962 BM-0962 KF-1330_Heatsink_Unit Hex Cu Boss, M3x0.5Px6L, H=8mm 22-290-30008051 Round Washer Head Screw, M3x0.5Px5mm 22-242-30005311 Thermal Interface Pads, 27x27x1.5mm 21-006-82721001 KS-1330 SERIES USER MANUAL...
  • Page 112 Appendix A System Diagrams KS-1330 Heatsink Unit Exploded Diagram Q’ty Comp onent Name P/N No. KS-1330 Heatsink (40x27x27mm) 21-002-14027003 KS-1330_Heatsink_holder 80-029-07001408 Round Head With Spring Washer Screw 22-232-30060011 M3x0.5Px5mm Page: A-7 KS-1330 SERIES USER MANUAL...
  • Page 113 Appendix A System Diagrams KS-1330 Power Unit Exploded Diagram Q’ty Component Name P/N No. KS-1330_Power_Holder 20-029-02026408 WPI 164W Power Supply 52-001-34180820 Round Washer Head Screw, 22-242-30005311 M3x0.5Px5mm KS-1330_DC_Out_Cable 27-060-40816111 KS-1330 SERIES USER MANUAL Page: A-8...
  • Page 114 Appendix A System Diagrams KS-1330 HDD Exploded Diagram Q’ty Component Name P/N No. KS-1330_HDD_Tray 20-054-02021408 2.5" SATA HDD See Order Flat Head Screw #2/ M3x0.5Px4mm 22-215-30004311 Page: A-9 KS-1330 SERIES USER MANUAL...
  • Page 115 Appendix A System Diagrams KS-1330 I/O Exploded Diagram Q’ty Component Name P/N No. KS-1330_IO_Rubber 90-013-06400408 KS-1330_Power_cable, L=400mm 27-012-40808071 KS-1330_Audio_cable, 3.5mm, L=180mm 27-023-40804111 KS-1330_LAN_Cable, L=160mm 27-026-40804111 KS-1330_USB 3 Cable, L=160mm 27-006-40804111 KS-1330_USB 1 Cable, L=140mm 27-006-40803111 KS-1330_COM_Cable, L=150mm 27-024-40803111 KS-1330_IO_Cover 20-004-02061408...

  • Page 116: Appendix B Technical Summary

    This appendix will give you a brief introduction of the allocation maps for the system resources. The following topics are included: • System Block Diagram • Interrupt Map • I/O Map • Memory Map • Configuring WatchDog Timer • Flash BIOS Update Page: B-1 KS-1330 SERIES USER MANUAL...
  • Page 117 Appendix B Technical Summary System Block Diagram KS-1330 SERIES USER MANUAL Page: B-2...
  • Page 118 High Definition Audio Controller ® Atom™/Celeron ® ® Intel /Pentium Processor EHCI USB - 0F34 Intel Device Intel Device Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System KS-1330 SERIES USER MANUAL Page: B-3...
  • Page 119 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System KS-1330 SERIES USER MANUAL Page: B-4...
  • Page 120 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System KS-1330 SERIES USER MANUAL Page: B-5...
  • Page 121 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System KS-1330 SERIES USER MANUAL Page: B-6...
  • Page 122 Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System Microsoft ACPI-Compliant System ® 4294967281 Intel I211 Gigabit Network Connection ® 4294967282 Intel I211 Gigabit Network Connection ® 4294967283 Intel I211 Gigabit Network Connection KS-1330 SERIES USER MANUAL Page: B-7...
  • Page 123 I210 Gigabit Network Connection ® 4294967291 Intel I210 Gigabit Network Connection ® 4294967292 Intel I210 Gigabit Network Connection ® 4294967293 Intel Trusted Execution Engine Interface ® Atom™ Processor E3800 Series/Intel ® ® 4294967294 Intel Celeron Processor N2920/J1900 KS-1330 SERIES USER MANUAL Page: B-8...
  • Page 124 Motherboard resources 0x00000050-0x00000053 System timer 0x00000061-0x00000061 Motherboard resources 0x00000063-0x00000063 Motherboard resources 0x00000065-0x00000065 Motherboard resources 0x00000067-0x00000067 Motherboard resources 0x00000070-0x00000077 System CMOS/real time clock 0x00000070-0x00000077 Motherboard resources 0x00000078-0x00000CF7 PCI bus 0x00000080-0x0000008F Motherboard resources 0x00000092-0x00000092 Motherboard resources KS-1330 SERIES USER MANUAL Page: B-9...
  • Page 125 ® Celeron Processor N2920/J1900 0x000003E8-0x000003EF Communications Port (COM3) 0x000003F8-0x000003FF Communications Port (COM1) 0x00000400-0x0000047F Motherboard resources 0x000004D0-0x000004D1 Programmable interrupt controller 0x00000500-0x000005FE Motherboard resources 0x00000600-0x0000061F Motherboard resources 0x00000680-0x0000069F Motherboard resources 0x00000A00-0x00000A0F Motherboard resources 0x00000A10-0x00000A1F Motherboard resources KS-1330 SERIES USER MANUAL Page: B-10...
  • Page 126 ® Atom™/Celeron ® ® 0x0000E060-0x0000E063 Intel /Pentium Processor AHCI - 0F23 ® Atom™/Celeron ® ® 0x0000E070-0x0000E077 Intel /Pentium Processor AHCI - 0F23 ® Atom™ Processor E3800 Series/Intel ® 0x0000E080-0x0000E087 Intel ® Celeron Processor N2920/J1900 KS-1330 SERIES USER MANUAL Page: B-11...
  • Page 127 Processor PCI Express - Root Port 4 - 0F4E ® 0x90620000-0x90623FFF Intel I211 Gigabit Network Connection ® Atom™/Celeron ® ® 0x9080E000-0x9080E3FF Intel /Pentium Processor EHCI USB - 0F34 0xFED00000-0xFED003FF High precision event timer 0x90804000-0x90807FFF High Definition Audio Controller 0xE0000000-0xEFFFFFFF Motherboard resources KS-1330 SERIES USER MANUAL Page: B-12...
  • Page 128 0x90500000-0x905FFFFF Intel Trusted Execution Engine Interface ® 0x90400000-0x904FFFFF Intel Trusted Execution Engine Interface ® Atom™ Processor E3800 Intel 0xA0000-0xBFFFF ® ® Series/Intel Celeron Processor N2920/J1900 0xA0000-0xBFFFF PCI bus 0xC0000-0xDFFFF PCI bus 0xE0000-0xFFFFF PCI bus KS-1330 SERIES USER MANUAL Page: B-13...
  • Page 129 To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once the chip exits the Extended Function Mode, it is in the normal running mode and is ready to enter the configuration mode. KS-1330 SERIES USER MANUAL Page: B-14...
  • Page 130 ;------ Select Logical Device 7 of watchdog timer -------------------------------------------- ;------ Enable Watch dog feature ------------------------------------------------------------------ 030h ;------ Clear WatchDog Timeout State----------------------------------------------------------- 0f5h ;------ Set timeout interval as 30seconds and start counting ---------------------------------- 0f6h ;------ Enable Watch PME-------------------------------------------------------------------------- 0FAh KS-1330 SERIES USER MANUAL Page: B-15...
  • Page 131 Appendix B Technical Summary ;------ Set second as counting unit ---------------------------------------------------------------- 0F5h ;------ Exit the extended function mode ---------------------------------------------------------- 0aah KS-1330 SERIES USER MANUAL Page: B-16...
  • Page 132 (3) The system will go into the BIOS setup menu. (4) Select [Hard Drive BBS Priorities] and set the USB bootable device as the 1 boot device. (5) Press <F4> to save the configuration and restart the system. KS-1330 SERIES USER MANUAL Page: B-17...
  • Page 133 BIOS ROM and the system will be unable to boot up next time. After BIOS update procedure is completed, the following messages will be shown: KS-1330 SERIES USER MANUAL Page: B-18...
  • Page 134 Restart the system and boot up with the new BIOS configuration. The BIOS Update is completed after the system is restarted. Reboot the system and verify if the BIOS version shown on the initialization screen has been updated. KS-1330 SERIES USER MANUAL Page: B-19...

Table of Contents