Advertisement
For ease of assembly, lay the fan down so that the front grill and control panel are facing up.
1.
Unscrew the base locking nut (E) (figure 1)
2.
Assemble the base by interlocking the guides on LH support base (F) with RH support base
B (G), ensuring that the power cord (P) is between the 2 sides (figure 2) and fasten them
with the base fitting lock (L).
3.
Slide the support base up to meet the base of the tower fan body and secure into place (M)
by using the screws provided (figure 2).
4.
Secure the base locking nut (E) by turning anti-clockwise (figure 3).
5.
Pass the power cord (P) through the guides on the base (Q) (figure 4).
Your tower fan is now ready to use.
Assembly
Advertisement
