Thank you for choosing a Line Magnetic product. Its implementation has been our know-how, both in terms of design to the manufacturing. Electronic components and mechanical parts correspond to the selection criteria of very high quality. Operation and finish of each product have been checked before delivery. To obtain best results, please read the advice contained in this document.
- Japanese Audio grade ALPS volume potentiometer has been applied. - Standard with remote control. For LM-34IA you can control the volume with the remote unit or the volume knob on the front panel. In our design in order to give you a precise idea on the volume level we are designing the volume knob at a way of Clock so you can easily judge and choose the volume level.
- Do not attempt to service this product yourself. Opening the cover may expose you to dangerous voltage or other hazards. - Use only spare parts and accessories recommended by Line Magnetic. - We are not responsible for any problems caused by checking and opening without permission of our company.
(2006/95/EC), Electromagnetic Compatibility (2004/108/EC) and apply eco-design requirements for energy products (2009/125/EC) when the appliance is installed and used in accordance with the user manual. For continued compliance only Line Magnetic accessories must be used with this product and servicing must be performed by specialized and qualified staff.
Keep all packing materials for future use and please fill in the warranty card for registration of warranty. Your Line Magnetic product is covered by the legal warranty in force in your country. You may also have other rights which vary from country to country, state to state.
Functions descriptions Input voltage level of the amplifier is 230VAC ±5% and please, make sure that your local voltage is the same as indicated on the rear panel. A too low or too high voltage can cause serious damage to your amplifier. In case you find an improper voltage, please contact our company responsible for the power supply or your local dealer.
Rear panel Signal input: Inputs (RCA plugs) are for connecting a «line level» source to your amplifier. It is designed to receive an «analog» signal (as opposed to «digital» signal). To connect your source we are using a traditional «RCA» cable, they are usually identified by a color code «RED»...
Ampere meter: Monitor the currency of the power tubes. SELECT EL34/KT88: The LM-34IA use EL34 tubes, but you can also change EL34 for KT88 tubes, and switch this button regarding the tubes. LM-34IA has tube selector switch and you can choose to replace the standard EL34 with KT range of power tubes include KT88, KT66, KT70, KT90, KT100 and 6550.
Speaker connection WARNING: Make sure that the device is not plugged into the mains before making any connections. It is also recommended to turn off or disconnect all other devices associated while making connections to the product. Never operate the amplifier without having first connect the loudspeakers. The principle of operation amplifier tube is different from transistor amplifier;...
Audio connection Connect other audio equipment to your amplifier Use a RCA (Cinch) stereo audio cable (red and white plugs) to connect your sources. 1- During installation please always refer to other product’s operation manuals. 2- Please do not insert the power cord into the main socket only if all other sources are well connected. 3- «R»...
- Line Magnetic Audio reserves the right to change specifications at any time without further notice in advance if products are upgraded. Specifications on the manual only show the specifications of the amplifier you’ve bought.
Remote control The amplifier comes with LM-02 remote control. Volume + button to increases sound level - button to decreases sound level Mute: To silence the system Installation and replacement of the batteries Installation 1. Remove the screws of the remotes back cover. 2.
12AU7EH, ECC82, 5814, 6189, CV4003 EL34 6CA7 Note: LM-34IA has tube selector switch and you can choose to replace the standard EL34 with KT range of power tubes include KT66, KT70, KT90, KT100 and 6550. Instead of EL34 you can use also KT88. Maintenance...
The LM-34IA has been designed and manufactured with parts that we manufacture to achieve an optimal result. We disclaim liability for potential problems or damage to the amplifier in the event of replacement of any of these original parts.
Need help?
Do you have a question about the LM-34iA and is the answer not in the manual?
Questions and answers