Table of Contents Thanks for choosing our Line Magnetic LM-512CA Vacumm Tube Preamplifier. Please read this manual carefully before installation and operation. In order to prevent damage during transportation, the amplifier and its tubes are packed with protective foam, please remove these foam pieces before operating your amplifier to avoid any risks !
Page 3
NO reaction to the remote Obstacle is located between the Remove the obstacle remote and the amplifier Line Magnetic logo is registered trademark of Zhuhai Line Magnetic Audio Co., LTD. Copyright of Zhuhai Line Magnetic Audio Co., LTD. All Rights Reserved.
Package Contents Please check the cartonbox carefully for any damage before opening it. 1. Line Magnetic LM-512CA 1 2. Main Fuses 2 3. Power cord 1 4. User’s Manual 1 5. Warranty Card 1 Note:All other parts except above are not included.
Storage Condition: Temperature: -20℃~70℃ Moisture: 20%~90% Note : Line Magnetic Audio reserves the right to change specifications at any time without further notice in advance if products are upgraded. Specifications on the manual only show the specifications of the amplifier you bought.
Page 6
Safety precautions CAUTION RISK OF ELECTRONIC SHOCK DO NOT OPEN .To reduce the risk of electric shock, do not remove the cover. .No user serviceable parts inside. Refer servicing to qualified service personnel. .To reduce the risk of fire or electronic shock, do not expose the unit to rain or moisture. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert users to the presence of uninsulated “dangerous voltage”...
Page 7
Functions Description Speaker Connection ① Ground Terminal. ② Line1, Line2, Line3, RCA Input Terminal. ③ Balance Phase Selection ( Selection between American Phase and British Phase Input Mode) ④ Balance Input Socket. ⑤ RCA Output Socket. ⑥ RCA Output or Balance Output Selection: If you are choosing RCA output the RCA output singnal...
Connection Audio Connection This is a standard way, connect the main equipment of LM - 512 CA method. Have a balance function, of output audio source To the CD audio output Suggestions: 1. During installation please always refer to the other equipments operation manual. 2.
Turning ON Precautions: The correct boot sequence is: First open the CD audio source such as power supply, then open the machine power supply, waiting for quiet long light again after open the power supply of the power amplifier. 接到交流电插座 AC 230V 50Hz Note:...
Need help?
Do you have a question about the LM-512CA and is the answer not in the manual?
Questions and answers