7. Method for Test Running with the Wireless Remote Controller
Please test it in accordance with the wireless remote controller's Operation Manual.
8. Alarm Code Indication
•
In case that some trouble occurs because of activation of safety device, etc., "
second ON / 0.5 second OFF).
•
Refer to the Technical Catalogue of airCore 700 unit about Alarm Code List.
•
Alarm Code indicates the flashing times of " " (green lamp) and "
"
" (green lamp):
"
" (yellow lamp):
Example
Alarm
•
"
" (red lamp) flashing (1 second ON / 1 second OFF) indicates abnormal transmitting between Indoor
Units and Outdoor Unit.
1200093
Hitachi-Johnson Controls Air Conditioning, Inc.
Add.: 1-16-1, Kaigan Minato-ku, Tokyo, Japan
Specification in this catalogue are subject to change without notice, in order that Hitachi-Johnson Controls
may bring the latest innovation to customers.
The flashing is shown at the 2 digit of Alarm Code
The flashing is shown at the 1 digit of Alarm Code
(Alphabet Code: A=10 times, B=11 times, C=12 times, .....)
3 5
"
" (yellow lamp)
"
" (green lamp)
"
" flashes 3 times (0.5 second ON / 0.5 second OFF)
"
" (yellow lamp) flashes 5 times (0.5 second ON / 0.5 second OFF)
" (yellow lamp) as shown below.
Scan the code to get the electronic manual.
P02263Q
2023.09
" (red lamp) flashes (0.5
V00
Printed in China