Daikin FTKY25WAVMV Operation Manual page 30

TROUBLESHOOTING
Troubleshooting
Case
The sound of streamer discharge
can no longer be heard.
The room temperature does
not reach the set temperature.
„ The unit does not receive
signals from remote
controller or has a limited
operating range.
„ Other electronic devices
start operating.
The flaps do not start swinging
immediately.
The ON/OFF TIMER does not
operate according to the settings.
A sound is heard.
„ A sound like a flow of water
„ Ticking sound
„ Clicking sound during
operation or idle time
„ Clopping sound
Rotating machinery causes
sound.
„ Sound is heard when the
vertical swing flaps and the
horizontal swing flaps move.
Air does not come out.
The air conditioner continues
operating even after COOL or
DRY operation is stopped.
28
Description / what to check
• If the airflow becomes weak, the streamer discharge stops.
• If the air coming out of the air conditioner is blowing against a
wall, the set temperature may not be reached correctly.
• Signal communication may be disabled if an electronic-
starter-type fluorescent lamp (such as inverter-type lamps) is
in the room. Consult your dealer if that is in this case.
• The remote controller may not function correctly if the
transmitter is exposed to direct sunlight.
• If the remote controller activates other electronic devices,
move them away or consult your dealer.
• The air conditioner is adjusting the flaps position.
• The flaps will start moving soon.
• Check if the ON/OFF TIMER correct. The actual length of timer
can be differ from user setted time for approx. 10 minutes.
• This sound is generated because the refrigerant in the air
conditioner is flowing.
• This is a pumping sound of the water in the air conditioner
and heard when the water is pumped out from the air
conditioner in cooling or drying operation.
• The refrigerant flows in the air conditioner even if the air conditioner
is not working when the indoor units in other rooms are in operation.
• This sound is generated when the size of the air conditioner
slightly expands or shrinks as a result of temperature changes.
• This sound is generated when the refrigerant control valves
or the electrical parts operate.
• This sound is heard from the inside of the air conditioner
when the exhaust fan is activated while the room doors are
closed. Open the window or turn off the exhaust fan.
• When the air conditioner is operating in a quiet environment
and the airflow rate of the indoor unit is set to Quiet Mode or
Low Mode, the motion of the swing flaps may cause sound.
„ In COOL or DRY mode
• If COOL/DRY operation is started with airflow settings on
"AUTO", the indoor unit will initially deodorise, which functions
to suppress any internal odours. As a result, the indoor unit
will not emit air immediately. (Wait for about 1 minute.)
• The air conditioner is operating in MOLD PROOF mode.
When you want to stop MOLD PROOF operation midway,
press .