Daikin FTKY25WAVMV Operation Manual page 19

[Flow of function]
MOLD PROOF setting
Automatic
start every time
Set function
during COOL
or DRY
MOLD PROOF setting
Manual
start one time
Set function
during stop
NOTE
„ Notes on MOLD PROOF setting
• When you want to stop MOLD PROOF operation midway, press
• This operation dries the inside of the air conditioner while streamer discharge is performed to
reduce the development of mold and odour inside the air conditioner. But the function does not
remove any adhered dust and mold.
• MOLD PROOF operation is not available when the unit is turned off using the OFF TIMER or
turned off using a smartphone.
„ Notes on MOLD PROOF operation
• The flaps may sometimes close to increase the drying effect inside the air conditioner.
• MOLD PROOF operation may not be performed if the COOL or DRY operation time is short.
• If MOLD PROOF operation does not suit your preference, set operation to "OFF".
„ Relation between MOLD PROOF operation and indoor unit lamps
Air conditioner
Operating
(OPERATION lamp lights up)
Not operating
(OPERATION lamp goes off)
MOLD PROOF operation
with streamer
Heat exchanger is
dried for about 60 mins.
During operation, flaps
open and air flows.
After
stop
MOLD PROOF operation with streamer
Heat exchanger is
washed for about
60 mins.
[Note]
After
During operation,
stop
cold air blows out
and the room
temperature may
drop.
MOLD PROOF setting
MOLD PROOF is "ON"
MOLD PROOF is "OFF"
MOLD PROOF is "ON"
Stop
Automatic stop
Heat exchanger is
dried for about 60 mins.
During operation, flaps
open and air flows.
After
stop
MOLD PROOF lamp
Lights up
Goes off
Lights up
OPERATION
Stop
Automatic stop
.
Page 16
STREAMER lamp
Depends on
STREAMER setting
Lights up
17