Operation - EFBE-SCHOTT TO 1060 Operating Instructions Manual

Fax +32 2 359 95 50

Empty the appliance frequently of breadcrumbs. Make sure the appliance is always

unplugged before emptying it. Check the "Maintenance and Cleaning" section.
When cleaning the appliance, do not use metallic scourers in order to avoid any future risk

of electric short-circuit.
Your appliance must never be switched on through an external timer or any kind of

separate remote control system.
Competent qualified service: after-sales department of the producer or importer or any
(*)
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In case of need you should return the appliance to this service.
Danger of burning! Make sure not to touch the hot surfaces of
the appliance. During use there is rising heat above the
appliance. Caution! Hot surface!
FIELD OF APPLICATION/OF OPERATION
 Use the appliance for domestic purposes only and in the way indicated in these
instructions.
 This appliance is intended to be used for domestic applications and similar applications
such as:
Kitchen corners reserved for personnel in shops, offices and other professional
environments.
Farms.
The use by clients of hotels, motels and other environments with a residential
character.
Environments of the "bed and breakfast" type.

OPERATION

 Before using your appliance for the first time, check if it is clean (see "Maintenance and
cleaning") as it comes into direct contact with bread. Check if any object has fallen into
the slot.
 In the first time, connect the appliance only to a mains earthed wall socket. A grommet
on the bottom of the appliance enables to maintain the cord by positioning it to the
backside of the appliance.
 Place the bread slices in the slot (for French bread, cut a loaf shorter than the slot, then
cut it in two pieces along its length). Your appliance is provided to receive French bread,
but also pieces of toast or other bread slices if their thickness and their length are shorter
than the one of the slot.
 Press down the bread carriage handle until it stops. Then release the pressure and the
handle will stay in the lower position, which means that the heating process has begun. If
the handle comes up immediately, check if the appliance is plugged in as the handle
blocks only when the unit is plugged in.
 You can adjust the browning intensity to obtain a more or less toasted bread by
positioning the browning control selector to one of the degrees marked from 1 to 6.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
8
Assembly page 8/20
SC TO 1060 - 151026