Table of Contents
Advertisement
FLEXIDOME HD VR
Cable tree
Use the following table to identify the wires in the cable tree:
Wire color
Red
Brown
Yellow / Green
Black / Orange
White / Orange
White / Violet
Orange / Violet
Violet
White
(Shield)
Black
(Shield)
For connections use wires of at least the same thickness.
Power connection
1.
Use a class 2 power supply 24 VAC or +12 VDC.
2.
Connect the power wires (red+ , brown-) to the power
supply. (Isolate unused power wires individually.)
3.
Connect the earth wire (yellow/green) from the camera to
the system earth of the installation to ensure correct EMC/
RFI and safety protection.
Network (and PoE) connection
1.
Use a shielded twisted pair (STP) Category 5e cable,
maximum length 100 meters.
2.
Use the RJ45 female-to-female network cable connector to
connect the network cable of the system to the RJ45
connector of the camera (Auto MDIX compliant -
automatically detects the cable connection type).
Power is supplied to the camera via the Ethernet cable,
compliant with the Power-over-Ethernet standard.
Bosch Security Systems
All manuals and user guides at all-guides.com
AWG
26
26
24
28
28
28
28
28
28
28
28
28
Installation Manual
Installation | en
Signal
+12 VDC / 24 VAC
GND DC / 24 VAC
Earth
Alarm Out A
Alarm Out B
Ground (Alarm In)
Alarm In 1
Alarm In 2
Audio In
Ground (Audio In)
Audio Out
Ground (Audio Out)
AM18-Q0637 | v1.1 | 2013.08
23
Advertisement
Table of Contents
