20
en | Installation
5.2
Mounting the unit
5.2.1
Surface mounting
PCD 123 mm (4.84 in)
To mount the camera on the surface of a wall or ceiling:
1.
Use the surface mount box as a template to mark the holes
indicated in the drawing. The PCD is 123 mm (4.84 in).
2.
Drill three holes with a diameter of 8 mm (0.3 in).
3.
Insert the supplied plugs into the holes.
4.
Attach the surface mount box securely using the three
supplied screws.
5.
If you use the side connection of the SMB, remove the cap
covering the side entrance, otherwise, leave the cap in
place.
AM18-Q0637 | v1.1 | 2013.08
All manuals and user guides at all-guides.com
9.5 mm (0.375 in)
3x
3x
Installation Manual
FLEXIDOME HD VR
Bosch Security Systems