Grounding Instructions - Black & Decker BCFK356 Instruction Manual

ENGLISH
SAFETY INFORMATION

GROUNDING INSTRUCTIONS

ELECTRICAL REQUIREMENTS
In the event of malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. The
appliance must be connected to a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
DANGER - Improper connection of the equipment grounding conductor
can result in a risk of electric shock. The conductor with insulation
having an outer surface that is green with or without yellow stripes is the
equipment grounding conductor. If repair or replacement of the cord or
plug is necessary, do not connect the equipment-grounding conductor to
a live terminal. Check with a qualified electrician or service person if the
grounding instructions are not completely understood, or if in doubt as to
whether the [tool/appliance] is properly grounded. Do not modify the plug
connected to the [tool/appliance] – if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
FOR GROUNDED, CORD-CONNECTED [TOOL/APPLIANCE] RATED LESS
THAN 15A AND INTENDED FOR USE ON A NOMINAL 120V SUPPLY
CIRCUIT
The appliance is for use on a nominal 120V circuit and should be connected
to a grounding outlet that looks like the one illustrated below. The use of a
temporary adaptor is not recommended.
Page 5