A4 - Unpacking; B - Installation - omake Omk.SBD01.E15.0101.Z5F User Manual

A4 – UNPAKING
- Please unpack the package according to the security codes and ordinances of current country
and get rid from the pack. Parts which contact with food are produced by stainless steel. All
plastic parts are marked by material's symbol.
- Please check that all parts of appliance had come completely and if they are damaged or not
during the shipping.
- After the installation of the device, please throw away of the packaging materials by paying
attention to safety and environmental conditions. For reuse of waste packages, throw them
into the relevant recycling bins according to their properties (foil, cardboard, Styrofoam). When
throw away of any electrical equipment, make it unusable by cutting the cable.
B – INSTALLATION
- Installation should be done by a qualified technician according to the instructions. Our
company cannot be held responsible for any damage to people, animals or property due to
incorrect installation.
- In case the device malfunctions, turn off the device. Only a service center authorized by the
manufacturer should service the device. Ask for original spare parts.
- The ground on which the device will be placed must be flat and it must be ensured that
the device operates on a scale. Take necessary precautions against the risk of the product
tipping over.
- Connection to the electrical power supply must be made by a competent person.
- Please be sure that the voltage connected to appliance must be equal with the voltage which
is on appliance's label.
- The ground connection of the device must be made in accordance with standards and safety
rules.
- The grounding of the device should be connected to the grounding line which is the closest
panel of electrical installation.
- Device electrical connection, main fuse and leakage current fuse must be made in
accordance with the current regulations and rules.
25