Siemens SIMATIC NET RUGGEDCOM RX1511 Installation Manual page 21

Installing the Device
2.5.1 Connecting High AC/DC Power
2. Connect the positive wire from the power source to the positive/live (+/L) termi-
nal on the terminal block.
3. Connect the negative wire from the power source to the neutral/negative (-/N)
terminal on the terminal block.
4. For screw terminal blocks, install the safety cover.
Figure 2.6
5. Using a braided wire or other appropriate grounding wire, connect the ground
terminal to the chassis ground connection.
12
All manuals and user guides at all-guides.com
Screw
1
Safety Cover
2
Screw Terminal Block
3
RUGGEDCOM RX1511 Device
4
Assembling the Safety Cover
4
3
2
1
RUGGEDCOM RX1511
Installation Manual, 12/2019, C79000-G8976-1056-16