Removing The Battery Pack From The Machine; Preventing Freeze-Up After Use - Toro 39915 Operator's Manual

To restart the machine refer to
Machine (page 15).
Removing the Battery Pack
from the Machine
1. Lift up the battery-compartment lid.
2. Press the battery pack-latch to release the
battery pack and remove the battery pack
(Figure 19).
Figure 19
1. Battery pack-latch
3. Close the battery-compartment lid.
Preventing Freeze-up after
Starting the
Use
•
•
•
•
g431093
19
In snowy and cold conditions, some controls and
moving parts may freeze. Do not use excessive
force when trying to operate frozen controls.
After using the machine, engage the auger to
clear any remaining snow from inside the housing.
Rotate the Quick Stick to prevent it from freezing.
Shut off the machine, wait for all moving parts to
stop, remove the key and the battery, and remove
all ice and snow from the machine.
Clean off any snow and ice from the base of the
chute.
Rotate the discharge chute to the left and right to
free it from any ice buildup.