TZS First AUSTRIA FA-2461-7 Instruction Manual page 3

• Minute
• Sequence of the date display (Day, Month / Month, Day)
• Year
• Month
• Day
• Language selection for Weekdays...
"ENG" (English), "GER" (German), "FRE" (French), "SPA" (Spanish), "ITA" (Italian),
"DUT" (Dutch), "DAN" (Danish), "POR" (Portuguese), "NOR" (Norwegian), "SWE"
(Swedish), "POL" (Polish), "FIN" (Finnish), "CZE" (Czech), "HUN" (Hungarian),
"RUS" (Russian)
• Current Weather
Note: You can exit the setup mode by touching the [SNOOZE/LIGHT] button
at any time.
SETTING THE ALARM CLOCK
Press and hold the [ALARM] button for 2 seconds until the alarm time starts
flashing. You can adjust the following flashing values on the display step by
step using the [+]/[-] buttons and confirm by pressing the [ALARM] button
again.
Alarm 1: - Hour
- Minute
- Alarm repeat ("M-F" / "S-S" / "M-F" and "S-S")
- Snooze time (5-60 minutes or OFF)
Alarm 2: - Hour
- Minute
- Alarm repeat ("M-F" / "S-S" / "M-F" and "S-S")
- Snooze time (5-60 minutes or OFF)
Note: "M-F" = Monday to Friday; "S-S" = Saturday & Sunday
ACTIVATING/DEACTIVATING ALARMS
Once the alarm has been set, briefly press the [+] button to switches between
the following states:
• Alarm 1 activated
• Alarm 2 activated
• Both alarms activated
• Both alarms deactivated
Active alarms are indicated by a bell icon on the display.
Note: You can temporarily display the set alarm times by briefly pressing the
[ALARM] button.
ALARM STOP AND SNOOZE FUNCTION
When the alarm rings, touch the [SNOOZE/LIGHT] button to activate snooze
mode. The acoustic alarm stops and will restart after the previously set time.
If the snooze time was set to OFF, the alarm will stop for that day. To stop the
alarm immediately, either touch and hold the [SNOOZE/LIGHT] button for 2
seconds or press any other button.
Note: The alarm will sound for a maximum of 2 minutes if not turned off
manually. After this period, the alarm automatically ends for that day.
4
TEMPERATURE & HUMIDITY
The current indoor temperature [A4] and humidity [A5] are displayed on the
bottom of the screen, and the current outdoor temperature [A3] and humidity
[A6] are displayed above the house graph when the wireless outdoor sensor is
successfully connected to the weather station.
The weather station can connect up to 3 wireless sensors on 3 different
channels. To switch between the displayed channels, press the [-] button. You
can also choose to cycle though all channels in 5-second intervals. In this case,
the " " icon is displayed above the outdoor channel icon [A7].
Indoor temperature measurement ranges: -9.9°C (14.2°F) – 50°C (122°F)
Outdoor temperature measurement ranges: -40°C (-40°F) – 70°C (158°F)
Indoor & outdoor humidity measurement range: 20%RH – 95%RH
If the temperature readings are below the measurable range, "LL.L" is displayed,
if they are above the range, "HH.H" is displayed.
If the humidity readings are below the measurable range, "19%" is displayed
and if they are above the range, "96%" is displayed
MAX/MIN TEMPERATURE & HUMIDITY RECORDS
To view the max/min temperature and humidity records for that day, briefly
press the [MEM] button. Repeatedly pressing the [MEM] button switches
between MAX, MIN and current values.
The max/min records for temperature and humidity are reset daily at 00:00. To
reset them manually, press and hold the [MEM] button for about 3 seconds.
FROST WARNING
When the outdoor temperature is between -1°C (+30°F) and +3°C (+37°F), the

frost warning icon " " flashes next to the displayed temperature.
INDOOR COMFORT & WINDOW OPEN/CLOSE INDICATOR
The indoor comfort level is calculated on the basis of the indoor temperature
and humidity.
There are 5 levels in total:
WET COMFORT DRY WET COMFORT DRY WET
TO DRY DRY COMFORT
<35% RH 35-44% RH 45-65% RH
By comparing the indoor and outdoor absolute humidity, an indicator will
appear above the outdoor humidity display to illustrate outdoor climate
conditions. There are three indicators that can be displayed:
MORE DRY NO CHANGE
By comparing the status of the indoor comfort and outdoor climate indicator,
the recommendation to open or close the window is displayed in the house
graph. The corresponding relationship is as follows:
INDOOR COMFORT OUTDOOR CLIMATE
LEVEL INDICATOR
COMFORT MORE DRY
NO CHANGE
MORE WET
DRY NO CHANGE
DRY MORE WET
COMFORT DRY WET COMFORT DRY WET COMFORT
WET TO WET
45-65% RH >80% RH
MORE WET
"OPEN THE "CLOSE THE
WINDOW" WINDOW"
INDICATOR INDICATOR
OPEN
5
DRY