Table of Contents
Advertisement
LCD BRIGHTNESS SETTING
Operation:
Step 1: Press
to ENTER the LCD BRIGHTNESS Submenu
Step 2: Press
to Set the desired brightness level.
The default setting is set at 50%.
FIRMWARE UPDATE SETTING
Operation:
Do not attempt to update the Firmware with any other updates than those
released by the manufacturer. Critical damage can occur if unapproved updates
are applied or updates are applied incorrectly.
Step 1: Download the firmware update onto an empty USB storage device. Connect the
storage device to the Charger through the USB port.
Step 2: Press
to Enter the Firmware update submenu
Step 3: Press
the update mode.
Step 4: Press the Start/Stop button. The device will automatically update the firmware
version.
Step 5: Once the firmware update is complete, press any key to restart the charger with
the updated software.
DEVICE INFORMATION
Operation:
Press
to Enter the Device information display:
Display: Firmware version, the TFT firmware version, the Product rating, etc.
4. CHARGE MODE
The chargers advanced software is optimized to correctly and completely charge a wide
variety of battery types and chemistries; including Lead-Acid (WET/Flooded, AGM, EFB,
GEL) and Lithium (LiFePo
Once the CHARGE Mode is selected, the charging voltage, battery type and charging
voltage can be entered.
Ensure that the input parameters (nominal voltage, battery type, charging current)
are correct for the battery that you are attempting to charge, that they meet the
battery manufacturer's specifications and that you have read the battery's recharging
instructions. Failure to respect the battery specifications may result in damage to the
charger, the battery, the vehicle, property, or personal injury.
to set the four-digit code provided by the manufacturer to unlock
).
4
9
Advertisement
Table of Contents
