Test Mode - Projecta HDBM35 Manual

6. SHOWROOM MODE (POWER SUPPLY MODE)
Supply power to, and maintain the battery of vehicles in demonstration mode:
Output Voltage: Adjustable between 12.6 - 14.5V (x2 for 24V mode HDBM35 only).
Output Current: Adjustable between 5 – 150Amp for the HDBM150 and 1 – 35Amp for
the HDBM35.

7. TEST MODE

Test both the vehicle's battery and starting system performance. (Voltage and
waveform)
Step 1: Press
Step 2: Press
Battery Voltage; Output voltage, Output current.
Step 3: Press
Display in Showroom Mode:
Load percentage: displays the load on the charger (%)
Current: displays the output current (A)
Voltage: displays the output voltage (V)
Watt: displays the output power (W)
Time: displays the duration
Step 1: Press
Step 2: Press
Step 3: Press
Display in Test Mode:
Battery Voltage: displays the vehicle's battery voltage (V)
Starting System: displays the voltage waveform and
minimum voltage
Test Result: Excellent, Good, Needs to be recharged, Bad
to Enter or Exit the mode.
to Select the desired parameter:
to Start or Stop Showroom mode.
to Enter or Exit this mode.
Select the correct voltage:
to Start or Stop the Testing process.
13