Language Settings - Projecta HDBM35 Manual

Operation:
Step 1: Press
Step 2: Press
Step 3: Press
Settings Displayed: LANGUAGE; AUTO-DETECT; CABLE CALIBRATION; LCD
BRIGHTNESS; FIRMWARE UPDATE; DEVICE INFO

LANGUAGE SETTINGS

Operation:
Step 1: Press
Step 2: Press
Step 3: Press
Languages Displayed: English; French, Germany, Spanish, Russian, Italian, Dutch
AUTO-DETECT SETTING
Operation:
Step 1: Press
Step 2: Press
Step 3: Press
Settings Displayed: CHARGE ON / OFF; SHOWROOM ON / OFF
If the AUTO-DETECT is ON, the charger will automatically restart the CHARGE or
SHOWROOM modes following an AC power cut. Please see the CHARGE MODE or
SHOWROOM MODE introduce in the sections 4. and 6.
CABLE CALIBRATION SETTING
Operation:
Step 1: Press
Step 2: Connect the positive and negative clamps together ensuring a solid connection.
Step 3: Press the Start/Stop button. The charger will automatically test the output cables.
Settings Displayed:
88
to ENTER the SETTING submenu.
to Select the desired setting.
to CONFIRM and proceed into the desired settings menu.
to ENTER the LANGUAGE Submenu.
to Select the desired language.
to Confirm the selected language.
to ENTER the AUTO - DETECT Submenu.
to Select the desired setting.
to Confirm the AUTO - DETECT setting.
to ENTER the CABLE CALIBRATION Submenu.
Important: If the DC output cables need
to be replaced, consult your distributor to
order a replacement set. Only DC output
cables approved by the manufacturer
can be used with this device, once the
cables have been replaced, they must be
calibrated as shown above.