Table of Contents
Advertisement
BEFORE FIRST USE
1.
Remove all packaging materials and read all instructions.
2.
Check that all accessories are complete and the appliance is
not damaged.
3.
Clean all parts to remove any dust or manufacturing residue.
4.
Clean the water storage tank and ice collecting tray with clean
water.
5.
The incline angle of the ice maker should not exceed 45°
during transportation or use. Do not turn the ice maker upside
down. Doing so could cause the compressor or refrigerating
system to operate incorrectly. Please allow time for the liquid
in the compressor to settle after the ice maker is moved or
transported. Before using the ice maker for the first time, please
wait for 2 hours after the unit has been positioned on a level
surface.
6.
The appliance must be placed on a dry and level surface with
sufficient ventilation, far from heat sources such as ovens,
heaters and corrosive gases. Leave around 15cm clearance on
all sides of the ice maker for proper ventilation.
7.
Do not fill the water reservoir with hot water. This may damage
the ice maker. It is best to fill the water tank with water that is
room temperature or lower. The water quality added to the tank
should be drinkable.
8.
Do not use the appliance at a very cold environment (lower than
5°C).
9.
Run the Clean Function, as described on page 7.
8
Advertisement
Table of Contents
