Table of Contents
Advertisement
USING YOUR ICE MAKER
9.
The ADD WATER indicator will light up when the water tank is
out of water and the ice making cycle will stop automatically.
Remove the ice basket and add water to the water tank, and
then press the ON/OFF button again to restart the ice making
cycle. The appliance will start working automatically after 20
minutes if the user forgets to restart the appliance after refill.
10.
When you have the desired amount of ice, stop the ice making
cycle by pressing the ON/OFF button and unplug the unit from
the wall outlet.
11.
Open the transparent lid and transfer the ice to a freezer.
12.
Allow the ice maker to reach room temperature.
CARE & CLEANING
Clean the water tank if the appliance has water in the tank and
•
has not been used for 48 hours.
If the appliance is left empty for long periods, switch off,
•
defrost, clean, dry, and leave the lid open to prevent mould
developing within the appliance.
Tilt the appliance around 30° and move it forward to the
•
place where the drainage plug is about 60mm away from the
countertop. Open the drainage plug and drain the excess water
(see below).
10
Drainage Plug
Advertisement
Table of Contents
