Table of Contents
Advertisement
®
KAMVAS
If the secondary display is a mirrored mode connection, KAMVAS and another
monitor will display exactly the same image and screen cursor movement.
If you are in the extended display mode, you need to set the display on the driver
that which portion of the display screen your KAMVAS will map to.
3.2.2 Working Area Setting
Define the display area that will be mapped to the screen area.
1. Full Area: the entire active area of the Display. This is the default setting.
2. Same Ratio with LCD.
3. Customized Area: 1.> Enter coordinate values. or2>. Drag the corners of the
foreground graphic to select the screen area.
13
20
/
www.huion.com
Advertisement
Table of Contents
