Dell P84FP113G Service Manual page 58

3. Adhere the tapes that secure the touchpad to the palm-rest assembly.
4. Align the screw holes on the touchpad bracket with the screw holes on the palm-rest assembly.
5. Replace the three screws (M2x3) that secure the touchpad bracket to the palm-rest assembly.
6. Adhere the tape that secures the touchpad bracket to the palm-rest assembly.
7. Adhere the tapes that secure the touch-pad assembly to the palm-rest assembly.
8. Adhere the touchpad cable to palm-rest assembly and slide the touchpad cable into the connector on the touch pad and
close the latch to secure the cable.
9. Slide the touchpad cable into the connector on the system board and close the latches to secure the cable.
58 Removing and installing components