Operation; Control Panel And Remote Control - LG LA150GC Owner's Manual

OPERATION

Control Panel and Remote Control

5 6 7
4 3
NOTE
• The feature may be changed according to the type of model.
• On control panel surface have protection film, Please remove film before use.
Power
1
Press to turn the air conditioner ON or
OFF.
Sleep Mode
2
This mode keeps operating noise to a
minimum and turns the air conditioner off
after a set time. The timer can be set from
1 to 12 hours.
NOTE
• In the Cool, Dry Mode setting
temperature increases by 1 °C after
30 minutes and additional 1 °C
after another 30 minutes for a more
comfortable sleep.
• The setting temperature increases up
to 2 °C from the preset temperature.
• When the Timer is set, the display and
the product automatically turn off 5
seconds after the set time.
• To turn on the display when the
brightness of the display is set to OFF,
press any button. The display will turn
off after 5 seconds.
• To turn the display on, press and hold
the Mode button on the remote control
for 3 seconds.
8
2 1
Remote Control
1
4
3
Delay ON/OFF Timer
3
Delay ON - When the air conditioner is off, set it
to automatically turn on from 1 to 24 hours later,
at its previous mode and fan settings.
Delay OFF - When the air conditioner is on, set
it to automatically turn off from 1 to 24 hours
later.
NOTE
• Each press of the Timer button advances
the timer by 1 hour. After the last press the
display returns to the temperature setting.
Operation Mode
4
Press the Mode button to cycle between 3
types of air conditioner operation: Cool / Dry /
Fan.
Cool - This mode is ideal on hot days to cool
and dehumidify the room quickly. Use the
Temp
buttons to set the desired room
temperature and use the Fan Speed button to
set the desired fan circulation speed.
Dry - This mode is ideal for rainy and damp
days to dehumidify the room rather than cooling
it significantly. Humidity is removed from
the room by the combination of compressor
operation and the fan speed fixed at Low.
The compressor and fan turn off once the set
temperature is reached. Fan speed cannot be
adjusted in Dry mode.
Fan - In this mode the fan circulates air but the
compressor does not run. Use the Fan Speed
button to set fan speed to High, Medium or
Low. In this mode, you cannot adjust the set
temperature.
EN
8
9
7
10
2
13