ADJ Boom Box FX1 User Instructions page 9

Boom Box FX1
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until "FHRS" is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU
to exit.
VER
- Use this function to display the Software version of
the unit.
1. Press the either the MENU button until "VER" is displayed, press
ENTER.
2. The display will show the software version.
RSET
- This function will reset the unit.
1. Press the MENU button until "RSET" is displayed. Press the
ENTER button and the unit will reset itself.
ADJ Products, LLC - www.adj.com - Boom Box FX1 Instruction Manual Page 16
System Menu Boom Box FX1
To enter the home position adjustment menu, press the ENTER
button for at least 5 seconds. In this submenu you are able to adjust
the original position of the beam and gobo motors and laser motors.
oPA1
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "oPA1" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
oPA2
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "oPA2" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
oLAh
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "oLAh" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
oLAY
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "oLAY" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
- Adjustment of the beam motor.
- Adjustment of the gobo motor.
- Adjustment of laser motor 1.
- Adjustment of laser motor 2.
ADJ Products, LLC - www.adj.com - Boom Box FX1 Instruction Manual Page 17
Offset Menu