Arrma 1/8 INFRACTION 4X4 3S BLX 4WD All-Road Street Bash Resto-Mod Truck RTR Get Started page 18

If using LiPo batteries you must set the correct battery mode on the ESC
(electronic speed controller) to prevent battery damage.
If the ESC temperature exceeds 125 degrees Celsius/257 degrees Fahrenheit, the ESC will
enter temperature protection mode and the green status LED will blink. Once the ESC has
The brushless ESC is setup for use straight from the factory, if you want to alter the settings for your
track or driving style please see the table and steps below:
Variable
1
2 Punch Setting
3 Brake Strength
4 Running Mode
5 Motor Rotation
6 BEC Voltage
Power on the
transmitter.
Press and
release the
set button.
another programming item.
To reset the ESC to factory default settings, connect a battery, turn the transmitter on and then turn
the car on. Press and hold the set button for 5 seconds and release. The Red and Green lights will
Setting > 1
LIPO
Level 1
25%
Fwd/Brk/Rev
Normal
(CCW)
6.0v
To reset all programming items, press and
Connect battery
to the esc and
key for one
switch on the
esc.
The number of
Hold the set button
times the green
the programming
programming item.
item number.
2 3
NIMH
Level 2 Level 3 Level 4
37.5% 50% 62.5%
Fwd/Brk
Reverse
(CW)
7.4v
Hold set
Green led
second.
for three seconds
to select the
18
4 5 6
Level 5
75% 87.5%
Release the set
button to enter
programming.
The number of times the
option number (within the
programming item).
Press and hold the set button
for three seconds to save the
selected option.
WWW.ARRMA-RC.COM
7
100%