Step 4: Preparing For The Installation Of The Tv - Sony BRAVIA KLV-46W400A Install Manual

Step 4: Preparing for the
installation of the TV
Follow the steps below to prepare for installing the TV.
1
Disconnect all the cables from the TV.
2
Remove the screws guided by the arrow
marks of the TV.
KLV-32W400A
KLV-52/46/40W400A
Do not remove any other screws from the TV.
3
Secure the Mounting Hook to the rear of
the TV.
Referring to the Screw and Hook locations
diagram/table on page 5, determine the screw
positions, and secure the Mounting Hook to the
rear of the TV.
1 Secure the Mounting Hook to the rear of the TV
temporarily, using the supplied four screws
(+PSW6 × 16).
2 Be sure that both screws are securely tightened
with equal torque strength to the rear of the TV.
Square
hole
Mounting Hook
Align the tab on the rear of the Mounting Hook
with the square hole on the rear of the TV as in
the illustration below.
Square
hole
Notes
Be sure not to use any screws other than the supplied
ones (+PSW6 × 16) when securing the Mounting
Hook.
Screw
(+PSW
GB
6 × 16)
Tab
3
(GB)