Installing The Tv - Sony BRAVIA KLV-46W400A Install Manual

English
To Customers:
For product protection and safety reasons, Sony
strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do
not attempt to install it yourself.
Your KLV-52W400A/KLV-46W400A/KLV-
40W400A/KLV-32W400A can be installed using
SU-WL500 Wall-Mount Bracket (sold separately).
Please provide your licensed contractor with this
installation supplement as well as the Instructions
(supplied with the SU-WL500 Wall-Mount Bracket).
Read these documents carefully for safety and proper
installation.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation,
periodic maintenance and examination of this product.
GB

Installing the TV

The TV can be installed on a wall by attaching a Wall-
Mount Bracket (sold separately).
Verify your TV's model number and be sure to use the
bracket specified for your model only. Refer to the
Steps on this manual along with the Instructions
supplied with the SU-WL500 Wall-Mount Bracket, to
properly carry out the installation.
Sufficient expertise is required for installing this
product, especially to determine the strength of the
wall for withstanding the TV's weight. Be sure to
entrust the attachment of this product to the wall to
Sony dealers or licensed contractors and pay
adequate attention to safety during the installation.
Sony is not liable for any damage or injury caused
by mishandling or improper installation.
2
(GB)
Step 1: Checking the parts
required for the
installation
Open the Wall-Mount Bracket package and check the
contents for all required parts along with the
Instructions.
Step 2: Deciding on the
installation location
Decide where you want to install your TV. Refer to
page 5 of this manual for the TV installation
dimensions table.
Refer to the Instructions for SU-WL500.
Step 3: Installing the Base
Bracket on the wall
Refer to the Instructions for SU-WL500.