Radio Shack PRO-160 Manual page 5

Scanner Setup
/
SCAN
• Scan the stored channels; scan an active ID while trunking.
• Press and hold to turn Signal Stalker on and off.
/
MAN MENU
• Manually enter a channel.
• Press after FUNC to enter menu mode.
/
SRCH TUNE
• Start a chain search; start and select a service search.
• Press after FUNC to enter the fine tune mode and search a
specified frequency range.
TRUNK / MODE
• Enter the Talk Group ID program mode.
• Press after FUNC to select the modulation for trunking system.
/
WX
• Start weather search.
• Press and hold to activate Skywarn.
8
/
1- 0 A-Z
Input a number or character
/ /
• DELAY OPEN/CLOSE
• Enter a decimal point, space, or hyphen.
• Turn delay on or off.
• Press after FUNC to change trunk open/close mode.
/
ENT PGM
• Complete the entry of frequencies and text.
• Put the scanner in programming mode.
/
DIM M-LOCK
• Set the display brightness.
• Press and hold to lock the memory.
/
BANK
• Select options during programming; change scan or search
direction; change the ID location number while trunking.
• In Scan mode, press after FUNC to go to select bank menu.
• In Manual or Program mode, press after FUNC to change bank.
/
PSE TEXT
• Stop and resume search or scan.
• Change from program mode to enter text tag mode.
9
Scanner Setup