Table of Contents
Advertisement
en operation
12.10 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Note: Operate this appliance using
the water drain hose provided. If you
connect the water drain hose
→ Page 14, you do not have to regu-
larly empty the condensation con-
tainer → Page 32.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
The display shows the following
¡
after drying: "End"
or the display shows the following
¡
during operation:
Pull out the condensation con-
1.
tainer, keeping it level.
32
.
Empty the condensation container.
2.
Check the condensation container
filter → Page 39 regularly and
clean the filter if it is dirty.
Make sure that you insert the con-
densation container before operat-
ing the appliance.
→ "Inserting the condensation con-
tainer", Page 32
Inserting the condensation
container
Push the condensation container
▶
in as far as it will go.
Advertisement
Table of Contents
