Related Manuals for Yard force LS G35
Summary of Contents for Yard force LS G35
- Page 1 LS G35 M0L-SP03-40 40V CORDLESS CHAIN SAW Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
- Page 2 Read this manual carefully prior to assembling and operating the product. It is dangerous to operate this product without being familiar with these instructions. Keep this manual in a safe place and have it ready for future reference.
-
Page 4: Table Of Contents
INTENDED USE LS G35 Original Instruction This cordless chainsaw (hereinafter product or “power tool”) is designed for cutting wood only. The product is not designed for any other types of application (e. g. cutting of brickwork, plastic or food). CONTENT The product is to be used by adults. -
Page 5: General Safety Warnings
GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS the plug in any way. Do not use any adapter plugs with alcohol or medication. A moment of inattention while earthed (grounded) power tools. Unmodified plugs and operating power tools may result in serious personal matching outlets will reduce risk of electric shock. - Page 6 GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS Battery tools use and care Power tool use and care 1. Do not force the power tool. Use the correct power tool 1. Recharge only with the charger specified by the for your application. The correct power tool will do the manufacturer.
-
Page 7: Product Safety Warnings
GENERAL SAFETY WARNINGS PRODUCT SAFETY WARNINGS Return to any authorised service centre. CHAIN SAW SAFETY WARNINGS 7. Store the appliance with battery pack fully charged at 1. Keep all parts of the body away from the saw chain when room temperature (around 20ºC). the chain saw is operating. - Page 8 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS or storing the chain saw always fit the guide bar cover. entangled cords increase the risk of electric shock. Proper handling of the chain saw will reduce the likelihood of 6. Make sure the charger cord is situated so that it will not accidental contact with the moving chain saw.
- Page 9 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS 5. To reduce the risk of explosion, ensure the battery pack 6. Kickback is the result of tool misuse and/or incorrect is not left in the sun for extended periods of time and that it operating procedures or conditions and can be avoided by is kept away from fire.
-
Page 10: Symbols
SYMBOLS SYMBOLS Safety symbols Please read the instruction handbook before The purpose of safety symbols is to attract your operating this machine. attention to any possible dangers. The safety symbols and their explanations deserve your careful attention This symbol is used throughout the user guide and full understanding. - Page 11 SYMBOLS SYMBOLS Warning symbols on the battery pack Always use two hands when operating the product. To reduce the risk of injury, user must read instruction manual carefully. Do not operate the saw using only one hand. Do not throw into water. Tip contact can cause the guide bar to move suddenly upwards and backwards which can cause serious injury.
-
Page 12: Technical Data
SYMBOLS TECHNICAL DATA Warning symbols on the charger Model LS G35 Nominal voltage of product with battery To reduce the risk of injury, user must read Chain speed 13 m/s instruction manual carefully. Cutting length 350 mm Chain type 90PX052X The charger is for indoor use only. -
Page 13: Description Of Product
DESCRIPTION OF PRODUCT INSTALLATION Install the guide bar and saw chain Parts description (Fig. A) Front guard / chain brake 1. Position the chain saw power head on its side with the side cover facing upwards. Guide bar 2. Turn the side cover knob anti-clockwise to remove the side cover and then loosen the Saw chain chain tensioning knob as much as possible. -
Page 14: Operation
OPERATION OPERATION Charging the battery pack Inserting and removing the battery pack NOTE: Remove the battery pack from the charger after it has been fully charged. NOTE: Hold the tool and the battery pack firmly when installing or removing the battery pack. NOTE: Battery should be fully charged before first use. - Page 15 OPERATION OPERATION Indicator panel and the wind direction to judge which way the tree will fall. - Remove dirt, stones, loose bark, nails, staples and wire from the tree. The indicator panel will be light ON while you squeeze the trigger switch. Notching undercut Status meaning as shown in Fig.
-
Page 16: Maintenance And Storage
OPERATION MAINTENANCE AND STORAGE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. - When the log is supported on one end, as Fig. 4 shown, cut 1/3 the diameter from the WARNING: Always wear protective gloves when performing any maintenance to the chain underside (underbuck). - Page 17 MAINTENANCE AND STORAGE MAINTENANCE AND STORAGE CHAIN MAINTENANCE TRANSPORTING AND STORING WARNING: Always wear gloves when handling the saw chain; these components are sharp - Do not store or transport the chain saw when it is running. Always remove the battery pack and may contain burrs.
-
Page 18: Troubleshooting
Unit A&B Escrick Business Park Escrick, York YO19 FD6/ United Kingdom WARNING: Always wear heavy duty gloves when adjusting or cleaning, especially when handling sharp objects. Declare that the product: Machine Description: 40V Cordless Chain saw LS G35/ M0L-SP03-40 Fault/malfunction Cause Remedy Function: Cutting Log Battery pack not properly... - Page 19 Declare that the product: Declare that the product: Machine Description: 40V Cordless Chain saw Machine Description: 40V Cordless Chain saw LS G35/ M0L-SP03-40 LS G35/ M0L-SP03-40 Function: Cutting Logs Function: Cutting Logs Complies with the essential health and safety requirements of the following directives:...
Need help?
Do you have a question about the LS G35 and is the answer not in the manual?
Questions and answers