Table of Contents
Advertisement
8．
Press Upgrade button and start update process.
9．
The update process is successful as the progress bar is 100%. After the update process is ok,
turn off power and wait indicator light is off. Turn on power and TV can work.
Checking :
It is needed to check the version of the firmware for MT5351AG which has been
download into the Plasma TV .
Press Menu button of the remote control and the main OSD menu is appeared on
the screen .
Use the remote control and select the DTV menu . following input "0000" (zero ,
zero , zero , zero) of the remote control .Then enter the mode of factory after input the
digits .
It is easy to be found the version of the current firmware for MT5351AG is
"
PDP4210EA1 CLA_QAM_XXXXXX_XX
"under the mode of factory .
119／125
Advertisement
Table of Contents
