Custom Settings - Monogram ZHU30RSTSS Owner's Manual

USING YOUR COOKTOP

CUSTOM SETTINGS

1. Press and hold All Off
and Timer pads together
for 3 seconds.
2. To navigate through the
Settings Menu, use the
+ and - buttons on the
Display. To select a menu,
press the Timer pad.
Settings Menu Chart
Feature Menu
1 Factory Settings
2 Control Lock
3 LED Light Level
4 Button Volume
5 Timer Alarm
Volume
6 Timer End Tone
7 Temperature Units
14
3. To activate a Setting, press the Timer pad.
4. To exit Settings Menu, press and hold the All Off pad.
Timer Pad
Default Options Requirements
• "YES" : Clears customized settings and restores
defaults
• "No" : exits out of the Factory reset menu and takes
the user back to the main menu.
• "USEr" : Control lock shall have aas defined in
Cooktop Control Lockout
• "Auto" :In addition to the standard lock behavior
(Cooktop Control Lockout) the control shall also lock
if no burner or timer has been active for 600 seconds
as well as there has been no key press for 600
seconds.
• Hi = 100% brightness
• rEG = 80% brightness
• Lo = 60% brightness
• "Hi" : All touch key sounds activated at 100%
• "Lo" : Touch key sound levels as defined in
parametric (ideally 50% of high).
• "OFF" : All touch key sounds off.
• The sound settings shall not affect alarm tone output
levels.
• "Hi" : The DAC level shall be defined in parametric.
The product level expectation is to achieve 40dB @ 5
meters from cooktop. 65dB @ 1 meter from cooktop.
• "Lo" : The DAC level shall be defined in parametric.
The product level expectation is to achieve 40dB @ 1
meter from cooktop.
• "Cont" " Timer tone plays continuously until the user
acknowledges the timer and tone.
• "bEEP" : The timer end tone is played only once.
49-2001138 Rev. 2