NEC NP-V260 User Manual page 84

[3D]
[V230X/V260/V230]
Selecting input connected to a source of 3D images [COMPUTER / VIDEO / S-VIDEO] (V230X/V260/V230)/
[COMPUTER 1/COMPUTER 2/HDMI/VIDEO/S-VIDEO] (V300X/V260X/V300W/V260W)
[3D]
This function switches the 3D mode between ON and OFF for each input.
ON ......................... Turns on the 3D mode for the selected input.
NOTE:
To confirm that the supported 3D signal is accepted, use either way of the following:
- Make sure that [3D] is displayed in the top right of the screen after the source is selected.
- Display [INFO.] → [SOURCE] → [3D SIGNAL] and make sure that "SUPPORTED" is displayed.
OFF ........................ Turns off the 3D mode for the selected input.
[GLASSES]
Select a 3D glass method.
DLP Link ...........................For the optional 3D supported goggles (NP01GL) or DLP
®
Nvidia 3D Vision*1 .............For NVIDIA
Others*2 .............................For other LCD shutter eyeglasses such as IR or wired LCD shutter types.
*1: For V300X/V300W only
*2: For other models than V300X/V300W
[FORMAT]
Selects either two formats: frame sequential or over/undert
FRAME SEQUENTIAL ..........Normal setting. (frame sequential 3D consists of a sequence of alternating frames wherein each
OVER/UNDER .....................For viewing a 3D images in under/over format.
3D Vision
® TM
NOTE:
This function will not work for VIDEO or S-VIDEO source.
In some cases when NVIDIA
If you use LCD shutter eyeglasses that are not compatible with DLP
may not synchronize to the projector properly.
successive frame carries the image meant for one or the other eye.)
[V300X/V260X/V300W/V260W]
3D Vision™ is used, the projector's remote control may not work well.
®
75
5. Using On-Screen Menu
Link compatible LCD shutter eyeglasses.
®
Link, the LCD shutter eyeglasses
®