NEC NP-V260 User Manual page 79

[OPTIONS(1)]
Selecting Fan Mode [FAN MODE]
This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode.
AUTO ..................... The built-in fans automatically run at a variable speed according to the internal temperature.
HIGH ...................... The built-in fans run at high speed.
HIGH ALTITUDE ..... The built-in fans run at a high speed. Select this option when using the projector at altitudes approximately
5500 feet/1700 meters (3000 feet/900 meters on V300X/V300W) or higher.
NOTE:
• When you wish to cool down the temperature inside the projector quickly, select [HIGH].
• It is recommended that you select High speed mode if you use the projector non-stop for consecutive days.
• If you use the projector at altitudes approximately 5500 feet/1700 meters (3000 feet/900 meters on V300X/V300W) or higher,
you are recommended to set [FAN MODE] to [HIGH ALTITUDE]. Failure to do so may cause the projector to overheat , resulting
in malfunction.
High altitude
12000 ft (3600 m)
to
8500 ft (2600 m)
8500 ft (2600 m)
to
5500 ft (1700 m)
5500 ft (1700 m)
to
3000 ft (900 m)
3000 ft (900 m)
to
0
• Using the projector at altitudes approximately 5500 feet/1700 meters (3000 feet/900 meters on V300X/V300W) or higher without
setting to [HIGH ALTITUDE] can cause the projector to overheat and the protector could shut down. If this happens, wait a couple
minutes and turn on the projector.
• Using the projector at altitudes less than approximately 5500 feet/1700 meters (3000 feet/900 meters on V300X/V300W) and
setting to [HIGH ALTITUDE] can cause the lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].
• Using the projector at high altitudes or in low air pressure can shorten the life of components.
• Your setting will not be affected even when [RESET] is done from the menu.
Selecting [COLOR SYSTEM]
This feature enables you to select video standards manually.
Normally select [AUTO]. Select the video standard from the pulldown menu. This must be done for VIDEO and S-
VIDEO Connectors separately.
V300X/V300W
[HIGH ALTITUDE] for [FAN MODE]
5° to 30°C
(ECO MODE ON only)
[HIGH ALTITUDE] for [FAN MODE]
5° to 35°C
[AUTO] for [FAN MODE]
5° to 40°C
V260X/V230X/V260/V230/V260W
[HIGH ALTITUDE] for [FAN MODE]
[HIGH ALTITUDE] for [FAN MODE]
70
5. Using On-Screen Menu
5° to 30°C
5° to 35°C
[AUTO] for [FAN MODE]
5° to 40°C