Maintenance - Samsung VS20R9076T3 User Manual

Maintenance

NOTE
• Sometimes the wheel of a brush can scratch the floor. Before using the
vacuum cleaner, check the wheels of the brush.
– If there is foreign matter on the wheel of the brush which cannot be
removed easily, contact a Samsung service center.
• If the inner part of the wet brush is clogged with a large foreign matter,
spinning speed decreases or stops.
CAUTION
• Storing the vacuum cleaner in sunlight for long hours may cause parts of
the vacuum to deform or discolor. Therefore, after cleaning the parts of
the vacuum cleaner, dry them in the shade.
• Do not clean the brush of the vacuum cleaner with water. Cleaning it with
water can cause the brush to deform or discolor.
• Before cleaning the charging stand, you must unplug the charging stand.
• If you notice a continuous reduction in suction or the vacuum cleaner
overheats abnormally, replace the ultra fine dust filter.
• After cleaning <a dustbin>, <a metal mesh grille filter>, or <a washable
micro filter> with water, dry in the shade.
– When heat is applied, product malformation may occur.
English 31