Connecting Loudspeakers; Bluetooth Operation; Volume Control - JBL SA550 Classic Quick Start Manual

Connecting Loudspeakers

RIGHT
Speaker
If you are unsure as to how your system should be connected, please contact your JBL dealer who
will be happy to help you.

Bluetooth Operation

To pair your Bluetooth source device with the SA550, open the Bluetooth settings on your source device
and scan for discoverable products to pair with. Select JBL SA550 #### from the list.
By default, the amplifier can be discovered and paired to when switched on and not connected to another
Bluetooth device – it does not need to be on the BT input. This function can be overridden by changing
the BT Auto SW setting in the menu.
Note: With the BT Auto SW setting changed to Off, the amplifier must be on the
BT input to be discovered by a new device and paired for playing music.
The amplifier can recall 5 device pairings. If 5 pairings already exist and a new pairing is made, the oldest
pairing will be replaced.

Volume Control

When playing music from Bluetooth, the volume of the amplifier can be controlled from your device.
Because portable devices often have a volume slider, there is a maximum volume setting in the amplifier to
prevent excessive volume output being selected accidentally.
Note: To adjust the maximum volume from Bluetooth, adjust the BT Volume
setting in the menu. The default is 40.
Pg 4 JBL SA550 Classic QSG
JBL SA550
LEFT
Speaker