Table of Contents
Advertisement
All manuals and user guides at all-guides.com
OWC2412QC ACCESSORIES
DISCHARGE DUCT ADAPTER
A discharge duct adapter is available for applications where
ducting the cool air is required. The adapter can be easily in-
stalled on the unit without fasteners, and be installed for either
vertical or horizontal ducting. The standard discharge grille is
removed and the DDA is placed in the grille opening.
2DDA-10
for OWC2412QC, converts the evaporator discharge
to a 10-inch diameter round duct.
When used in conjunction with the evaporator return air ple-
num, 2DEP-12, the unit can provide closed-loop cooling to and
from a given space without the influence of any outside air.
NOTE
—When a 2DDA-10 is installed, it is recommended to set
the evaporator blower speed to high, to avoid evaporator coil
freeze-up
.
2DDA-10
8
Advertisement
Table of Contents
