Table of Contents
Advertisement
The VLC-K Venturo Logic Controls system requires only
minimal maintenance:
- Make sure that transmitter is OFF and that both the crane
master power and crane hydraulics are OFF
- Clean transmitter housing as-needed with a damp cloth and
mild detergent (e.g. dish soap)
- Clean trigger control by blowing air around the trigger area
to remove debris; use light machine oil at trigger pivot
- Inspect switches and connector for looseness; tighten as
necessary
MAINTENANCE
VENCO VENTURO INDUSTRIES LLC
CINCINNATI, OHIO
E-STOP
POWER
AUX
ON/OFF
AUX 1
AUX 2
TITLE
MAINTENANCE
VLC-K SYSTEM
DATE
SECTION
-
07-25-23
SUPERSEDES
32010
-
Advertisement
Table of Contents
