Table of Contents
Advertisement
! PLEASE READ & UNDERSTAND THE VENTURO CRANE SAFETY MANUAL BEFORE OPERATING THIS EQUIPMENT !
8. UNSTOW THE CRANE
a. Winch down slightly.
b. Raise the boom so it clears the boom rest and any other obstruction(s).
c. Rotate the crane to the side of the vehicle so there is enough clearance to perform the next step.
d. Winch down enough to release the load block from its stowed position.
9. ATTACHING THE LOAD
a. Determine whether 1-part line or 2-part line lifting will be used, and adjust load block if necessary.
b. Position the crane so that the load block is directly over the center of the load.
c. Attach the load to the hook by means of slings or other approved devices.
!
·
NEVER USE ANYTHING LARGER THAN THE HOOK THROAT THAT PREVENTS SAFETY
LATCH FROM CLOSING.
·
DO NOT WRAP WIRE ROPE AROUND LOAD.
·
NEVER EXCEED MANUFACTURER'S CAPACITY CHARTS AND RATINGS.
d. Maintain a minimum of 5 full wraps of wire rope on the winch drum at all times.
10. LIFTING THE LOAD
a. Lift the load slightly off the ground to check the safety of the cargo.
! DO NOT ATTEMPT TO LIFT FIXED LOADS !
11. MOVING THE LOAD
a. Ensure the stability of the crane and load before moving the load.
!
·
NEVER OPERATE THE CRANE WITH PERSONNEL UNDER ANY PART OF THE BOOM OR
LOAD.
·
DO NOT EXTEND OR ROTATE A LOAD OVER ANYONE.
·
NEVER ALLOW PERSONNEL TO PLACE THEMSELVES UNDER ANY PART OF THE BOOM
OR LOAD.
·
NEVER LEAVE A CRANE LOAD SUSPENDED OR UNATTENDED.
b. Be alert! Always look for changes in the surroundings of your job site.
c. Avoid sudden starts and stops.
d. Do not use boom to push downward onto anything.
e. Do not use boom or winch to drag a load.
OPERATION GUIDE, 3/4
W A R N I N G
W A R N I N G
®
VENCO VENTURO INDUSTRIES LLC
CINCINNATI, OHIO
TITLE
OPERATION GUIDE
VLC SYSTEM
DATE
SECTION
-
11-28-18
SUPERSEDES
30008
-
Advertisement
Table of Contents
