Table of Contents
Advertisement
USER SETTINGS
VLC-K SYSTEM, OWNER'S MANUAL
USER SETTINGS OVERVIEW:
The VLC-K system has several user-configurable settings:
Stability Test Enabled or Disabled
AUX ON/OFF Latching Enabled or Disabled (Momentary)
AUX 1 Latching Enabled or Disabled (Momentary)
AUX 2 Latching Enabled or Disabled (Momentary)
STABILITY TEST MODE:
The Stability Test Mode is intended to be used only by the equipment upfitter that installs the crane and only for the
purpose of evaluating the overall stability of the installation
When Enabled (box checked), the crane will be able to reach 118% of the maximum rated capacity
This mode is automatically Disabled when the receiver is powered off
STABILITY MODE
STABILITY MODE
105
105
PRESSURE: 2050
LATCHING ENABLED:
When latching is Enabled (box checked), the specified AUX function will latch on and stay on until the same AUX
function is selected again (at which point it will turn off)
When latching is Disabled (box unchecked), the specified AUX function will only be energized for as long as the switch
or button is actuated
ACCESSING USER SETTINGS MENU:
User Settings are configurable using a browser (Chrome is recommended) on
your laptop or smart phone
Use WiFi to connect to "VENTURO3B306", the Receiver Gate
Enter "3B3063X1" when prompted for a password
Once connected to the Receiver Gate, open your internet browser and use
the address 192.168.1.1
You should now see the "Main Screen" (home menu)
Click on "USER SETTINGS" button
Set the options as desired by checking the boxes, then click the "Save" button
13.3V
%
%
PSI
VENCO VENTURO INDUSTRIES LLC
CINCINNATI, OHIO
TITLE
USER SETTINGS
VLC-K SYSTEM
DATE
SECTION
-
09-19-23
SUPERSEDES
32009
-
Advertisement
Table of Contents
